Home » Blogs » Technical Guides » Die Casting vs Injection Molding vs MIM: Process, Cost and Volume Comparison

Die Casting vs Injection Molding vs MIM: Process, Cost and Volume Comparison

Table of Contents

Tuowei Precision

Need expert machining solutions? Our team at Tuowei Precision is here to assist with all your manufacturing needs. Get in touch today for a quote on your ongoing or upcoming projects!

Die casting vs injection molding - molten metal die casting beside plastic injection molding machine

Die casting and injection molding are the same idea executed in different worlds: force fluid material into a steel mold under pressure, cool, eject, repeat. One fills the mold with molten metal, the other with molten plastic — and that single difference cascades into different machines, tolerances, costs and failure modes. Add metal injection molding (MIM), which molds metal powder like a plastic and then sinters it, and you have three processes that engineers regularly mix up. This guide compares all three with numbers — cycle times, tooling costs, tolerances and the volume thresholds where each wins.

The Three Processes in One Table

Die casting Plastic injection molding Metal injection molding (MIM)
Material Non-ferrous metals: aluminum, zinc, magnesium Thermoplastics (ABS, PP, PC, nylon…) Fine metal powder + binder: stainless, low-alloy steel, titanium
Part size sweet spot 10 g – 10 kg 1 g – several kg 0.1 – 100 g (small, complex)
Tolerance (typical) ±0.05–0.1 mm + 0.1%/25 mm ±0.05–0.1 mm (precision grades tighter) ±0.3–0.5% of dimension (sinter shrink ~15–20%)
Surface finish Ra 1.6–3.2 µm as-cast Mirror to textured — mold defines it Ra 0.8–1.6 µm as-sintered
Cycle time 20–60 s (zinc faster than aluminum) 10–60 s Molding 15–45 s + days of debind/sinter
Tooling cost $8,000–80,000 $3,000–60,000 $10,000–50,000
Economic volume 5,000+ pcs 1,000+ pcs (aluminum tooling lower) 10,000+ pcs

Die Casting: Metal at Production Speed

Molten aluminum (~660 °C), zinc (~420 °C) or magnesium is injected into hardened H13 steel dies at 10–200 MPa. Hot-chamber machines (zinc, magnesium) cycle fastest; cold-chamber machines handle aluminum, which would attack an immersed gooseneck. Strengths: real metal strength and stiffness, thin walls (to ~1 mm in zinc), excellent thermal/EMI shielding, and per-part costs of cents to a few dollars at volume. Weaknesses: porosity (limits welding and pressure-tightness unless vacuum-assisted), draft angles required, trimming flash adds steps, and dies cost more than plastic molds because metal erodes them. Full process details in our what is die casting guide and die casting services page; for zinc specifics see zinc die casting.

Injection Molding: Plastic’s Default Production Process

Plastic pellets are melted (~180–320 °C) and screwed forward into the mold at 50–150 MPa. Cooling channels in the mold — not water spray — pull heat out, and the cycle repeats every 10–60 seconds. Strengths: enormous material palette (flexible to glass-filled), in-mold texture and color, living hinges, overmolding, inserts, and the lowest per-part costs in manufacturing. Weaknesses: plastic properties (temperature, creep), sink marks over thick sections, weld lines, and tooling lead time. Our plastic injection molding services cover prototype aluminum tooling through million-shot production molds.

MIM: The One Everyone Forgets

Metal injection molding mixes fine metal powder (<20 µm) with a polymer binder, molds it like plastic, chemically or thermally removes the binder, then sinters at ~1,200–1,400 °C to 95–99% density. The part shrinks 15–20% — predictably — during sintering. MIM owns one niche completely: small, complex, high-volume steel or stainless parts — surgical instrument jaws, firearm components, watch cases, phone hinges. Versus die casting: MIM does ferrous metals and titanium (die casting cannot), achieves better mechanical properties than castings, but tops out around 100 g economically and adds days of furnace time. Versus CNC: at 10,000+ pieces MIM crushes machining on cost for complex small geometry; below that, machining wins — see our CNC vs injection molding comparison.

Cost Reality: Tooling + Per-Part

Scenario (typical 50 g part) Tooling Per part @10k Per part @100k
Aluminum die casting $15,000–40,000 $1.5–4 $0.8–2
Zinc die casting $10,000–30,000 $1–3 $0.5–1.5
Injection molding (ABS) $5,000–25,000 $0.4–1.5 $0.15–0.6
MIM (316L) $15,000–40,000 $2–6 $1–3
CNC machining (reference) ~$0 fixed $8–25 $6–20

The pattern: processes with tooling start expensive and get cheap; CNC starts cheap and stays flat. The crossover is why prototypes are machined and products are molded or cast.

Decision Matrix

Your situation Choose
Plastic part, any volume above ~1,000 Injection molding
Metal housing/bracket, 5,000+ pcs, aluminum/zinc OK Die casting
Small complex steel/stainless/Ti part, 10,000+ pcs MIM
Metal part needing pressure-tightness or welding Machining from billet, or vacuum die casting + impregnation
Under ~1,000–5,000 pcs, any material CNC machining — no tooling to amortize
Metal look at plastic cost Injection molding + plating/painting

Frequently Asked Questions

What is the difference between metal injection molding and die casting?

Die casting injects fully molten metal into a die and the part is finished in seconds; MIM injects a metal-powder/binder feedstock, then needs debinding and sintering over days. Die casting suits aluminum/zinc parts up to kilograms; MIM suits steel, stainless and titanium parts under ~100 g with superior mechanical properties.

Is die casting cheaper than injection molding?

Per part, no — plastic parts mold cheaper than metal parts cast, and plastic tooling wears slower. The comparison is really material-driven: if the part can be plastic, molding is cheaper; if it must be metal at volume, die casting is the cheap metal route.

What is the difference between a die and a mold?

Convention only: the steel tooling is called a “die” in metal casting and stamping, and a “mold” in plastic molding. Functionally both are matched cavity-and-core blocks with cooling, venting and ejection.

Can injection molding make metal parts?

Yes — that is exactly what MIM is: metal powder molded in an injection molding machine, then sintered solid. There is also die casting’s cousin thixomolding for magnesium. For one-offs and low volume, though, machining metal remains the practical route.

Prototype to Production With One Partner

Tuowei Precision runs die casting, injection molding and CNC machining under one roof — so we quote your part in the process that actually minimizes your cost at your volume, and bridge you from machined prototypes to production tooling without changing suppliers. Send your drawing for a 24-hour quote with process recommendation.

Portrait of a Tuowei Precision team member in a blue polo shirt in front of blurred CNC machines in the factory
About The Author
Andy

Manufacturing Engineer at tuoweiprecision

Written by Andy, Manufacturing Engineer at TUOWEI Precision. Andy specializes in CNC machining, precision manufacturing, and production engineering, with hands-on experience supporting projects from rapid prototyping through full-scale production. He works closely with engineering and manufacturing teams to evaluate materials, tolerances, machining processes, and design manufacturability. His articles provide practical, technically informed insights to help engineers and buyers make better manufacturing decisions, optimize production efficiency, and achieve consistent part quality. Explore TUOWEI Precision’s CNC machining and custom manufacturing solutions for your next project.

Let’s Build What’s Next Together

Partner with Tuowei Precision to Shape Your Vision

From rapid prototypes to scalable production, Tuowei Precision delivers reliable CNC machining with accuracy and consistency at every step. Start your project today.

Get In Touch With Us!
Prompt response guaranteed within 24 hours
🔐 All uploads are secure and confidential

Explore Insights & Innovation

Read our latest guides on CNC machining, materials, finishing and industry trends to make better production decisions.

Get In Touch With Us!
Prompt response guaranteed within 24 hours
🔐 All uploads are secure and confidential