Home » Blogs » Technical Guides » Micro Machined Parts: Capabilities, Size Limits, Tolerances & Process Comparison

Micro Machined Parts: Capabilities, Size Limits, Tolerances & Process Comparison

Table of Contents

Tuowei Precision

Need expert machining solutions? Our team at Tuowei Precision is here to assist with all your manufacturing needs. Get in touch today for a quote on your ongoing or upcoming projects!

Micro machined parts - tiny precision micro components held with tweezers over a coin for scale

Micro machined parts are components whose features are measured in microns rather than millimeters — 0.1 mm drilled holes, 0.05 mm wide ribs, watch-scale gears and medical components that fit on a fingertip. Producing them is not just “small machining”: tools flex, chips weld, and a fingerprint’s worth of heat changes the dimension. This page defines what micro machining realistically achieves, the size and tolerance limits, how such parts are measured, and when EDM or laser processes are the better choice.

What Counts as Micro Machining?

In practice, micro machining covers parts or features where:

  • Feature sizes run from 0.05 mm to ~1 mm (cutters down to Ø0.1 mm, drills to Ø0.05 mm)
  • Tolerances are ±0.002–0.01 mm (2–10 µm)
  • Whole parts often fit within a 10 mm cube

Micro Machining Capabilities

Process Capability
Micro milling End mills Ø0.1–1.0 mm; 3D features, pockets, slots; spindles to 60,000 rpm
Micro drilling Holes from Ø0.05 mm; depth up to 10× diameter
Micro turning (Swiss) Pins and shafts from Ø0.3 mm; L/D to 20:1 — see Swiss screw machining
Thread milling / tapping From M1 (tapped), M0.8 possible by thread milling
Dimensional tolerance ±0.005 mm standard; ±0.002 mm on controlled features
Surface finish Ra 0.2–0.4 µm milled; Ra 0.1 µm achievable
Edge condition Burr height controlled <5 µm with micro-deburring

What Makes Micro Machining Hard (and How We Control It)

  1. Tool deflection and breakage: a Ø0.2 mm end mill snaps at chip loads a Ø2 mm tool shrugs off — we run high-rpm spindles with micro chip loads (1–5 µm/tooth) and tool-by-tool runout control under 3 µm.
  2. Heat: a 1 °C part temperature rise grows a 10 mm aluminum part by ~0.2 µm — climate-controlled machining and measurement keep micron tolerances honest.
  3. Burrs: at micro scale a burr can be bigger than the tolerance — sharp tooling, exit strategies and micro-deburring (brush, blast, thermal) are specified per feature.
  4. Handling: parts this small are lost or damaged by ordinary handling — vacuum tweezers, trays and per-cavity packaging protect finished work.

Micro Machining vs EDM vs Laser: Choosing the Right Process

Factor Micro CNC machining Micro wire/sinker EDM Laser micromachining
Materials Metals and plastics Conductive metals only Almost anything
3D contours Excellent Limited (2.5D wire; sinker needs electrode) Shallow features best
Hardened steel Limited Excellent Good (thin)
Min feature ~0.05 mm ~0.02 mm (fine wire) ~0.01 mm
Heat-affected zone None Minimal recast layer Present — may need post-process
Deep holes 10× dia Excellent (EDM drilling 100× dia) Limited
Typical use 3D micro parts, pins, manifolds Hardened dies, micro slots Foils, stents, masks

Materials for Micro Machined Parts

  • Brass & copper alloys: the micro-machining favorites — stable, burr-friendly, excellent finish
  • Aluminum 6061/7075: light instrument components
  • Stainless 303/316/17-4PH: medical and dental instruments
  • Titanium Gr5: implantable components — titanium CNC machining
  • PEEK, POM, PTFE: insulators and fluidic parts — plastic machining services

Measuring Micron Parts: Metrology

  • Vision measuring systems for 2D features too small for contact probes
  • CMM with micro styli (Ø0.3 mm ruby) for 3D geometry
  • Optical comparators and micrometers for shafts and pins
  • Surface testers for Ra verification on functional faces
  • All critical dimensions reported at 20 °C with calibrated instruments — a tolerance that can’t be measured can’t be guaranteed

Typical Applications

  • Medical: biopsy instrument tips, dental implant screws, endoscope components
  • Electronics: RF connector pins, test probes, sensor housings
  • Optics & instruments: lens mounts, apertures, watch components
  • Fluidics: micro nozzles, orifices, manifolds

Frequently Asked Questions

What is considered micro machining?

Machining of features roughly 0.05–1 mm in size with tolerances of 2–10 µm, using miniature tooling, high-speed spindles and micron-level metrology — typically for parts that fit within a 10 mm cube.

What is the biggest problem in micro machining?

Tool fragility: micro end mills deflect and break at tiny chip loads, so success depends on runout control, high spindle speeds, micro chip loads and rigid, temperature-stable machines.

How much does micro machining cost?

Setup and metrology dominate: a simple micro part may cost more to inspect than to cut. Unit prices fall steeply with quantity — prototypes carry the programming and qualification cost, production runs amortize it.

What tolerance can micro machining hold?

±0.005 mm is standard; ±0.002 mm is achievable on controlled features with climate control and appropriate metrology.

Micro Machined Parts From Tuowei Precision

Tuowei Precision produces micro machined parts on high-speed milling centers and Swiss-type lathes, with vision-system metrology and per-feature burr specifications. For larger precision work see our precision machining and CNC machining services, or run the full program under contract machining. Send your drawing — quotes within 24 hours.

Portrait of a Tuowei Precision team member in a blue polo shirt in front of blurred CNC machines in the factory
About The Author
Andy

Manufacturing Engineer at tuoweiprecision

Written by Andy, Manufacturing Engineer at TUOWEI Precision. Andy specializes in CNC machining, precision manufacturing, and production engineering, with hands-on experience supporting projects from rapid prototyping through full-scale production. He works closely with engineering and manufacturing teams to evaluate materials, tolerances, machining processes, and design manufacturability. His articles provide practical, technically informed insights to help engineers and buyers make better manufacturing decisions, optimize production efficiency, and achieve consistent part quality. Explore TUOWEI Precision’s CNC machining and custom manufacturing solutions for your next project.

Let’s Build What’s Next Together

Partner with Tuowei Precision to Shape Your Vision

From rapid prototypes to scalable production, Tuowei Precision delivers reliable CNC machining with accuracy and consistency at every step. Start your project today.

Get In Touch With Us!
Prompt response guaranteed within 24 hours
🔐 All uploads are secure and confidential

Explore Insights & Innovation

Read our latest guides on CNC machining, materials, finishing and industry trends to make better production decisions.

Get In Touch With Us!
Prompt response guaranteed within 24 hours
🔐 All uploads are secure and confidential