IATF 16949 CERTIFIED · SHENZHEN

Automotive Sheet Metal Fabrication for Brackets, Shields and Enclosures

Tuowei Precision provides automotive sheet metal fabrication for brackets, heat shields, battery boxes, enclosures and custom car parts. We laser cut, bend, weld and finish metal parts in one Shenzhen facility, from a single prototype to production batches, with no strict minimum order.

All uploads are secure and confidential
Why Sheet Metal

Why Sheet Metal Suits So Many Automotive Components

Formed metal sheets give strong, light parts at low cost. A bracket bent from 2 mm stock weighs far less than one machined from a block, and it needs no mold, so design changes are cheap. That makes it the default for mounting brackets, shields, covers and enclosures in automotive manufacturing, and it allows easy customization for each vehicle variant.

The catch is tolerance stack-up. A flange that is 0.5 mm too long moves a hole pattern, and springback can open a bend by a degree or two. Our engineers check each flat pattern, bend sequence and K factor before cutting, so every metal part fits at automotive assembly.

CNC press brake bending an automotive sheet metal bracket
Low tooling cost and fast design changes
Good strength-to-weight and structural integrity
Prototypes in as little as 3 days
Cutting, bending, welding and finishing under one roof
Processes

Metal Fabrication Processes for Vehicle Components

Fiber laser cutting aluminum sheet

Laser Cutting

Advanced cutting with fiber lasers gives clean, low-distortion edges on carbon steel, stainless and aluminum alloys, holding cutting accuracy of ±0.002 in and positional accuracy of ±0.004 in. Plasma cutting and shearing suit thicker plate where edge quality matters less. See our laser cutting page for these cutting techniques.

CNC bending of automotive sheet metal

CNC Bending and Automotive Sheet Metal Forming

CNC press brakes form flanges, channels and boxes with springback built into the program. Our metal bending capacity covers sheet and plate up to 60 mm thick with up to 1,000 tons of force, which suits both thin covers and heavy frame brackets.

TIG welding a sheet metal enclosure

Welding and Joining

These joining methods cover most parts. TIG welding joins thin aluminum and stainless with low heat input, MIG suits thicker structural joints, and spot welding joins overlapping sheet. We also press in nuts, studs and standoffs before final assembly.

Powder coated sheet metal enclosure

Finishing

Powder coating, zinc plating, e-coating and painting protect steel parts, while anodizing protects aluminum. Finishing is applied after forming so the coating does not crack at the bends.

Materials

Material Selection: Steel and Aluminum Alloys

MaterialWhy it is usedTypical parts
Cold rolled steelLow cost, easy to form and weldBrackets, frames, guards
Galvanized steelRust protection at low costUnderbody brackets, covers
Stainless 304 and 409High-temperature and corrosion resistanceHeat shields, exhaust systems
Aluminum 5052Light, excellent formability and ductilityBattery boxes, enclosures, panels
Aluminum 6061Higher strength, weldableStructural brackets, mounts
Steel and aluminum sheet metal automotive parts

Alloy and thickness decide bend radius. As a rule, keep the inside bend radius at least equal to the sheet thickness for mild steel and larger for 6061. We confirm weldability and bend limits at the quote stage.

Parts

Automotive Applications: Custom Car and Vehicle Components

01Mounting brackets, gussets and reinforcement plates
02Heat shields and exhaust system brackets
03EV battery boxes, busbar covers and electronics enclosures
04Seat, dash and harness brackets
05Guards, covers and access panels
06Custom pieces and parts for hot rods in small batches

Large auto body panels such as a fender, closure panels and body-in-white (BIW) structures are made by high-volume production stamping with dedicated dies, which we do not offer. Our focus is the brackets, shields and enclosures that support car bodies, where laser cutting and CNC bending are faster and cheaper than stamping tools.

Quality

Quality Management and Structural Integrity

General part fabrication holds about ±0.010 in (±0.25 mm), with tighter values on laser cut features. Safety and performance depend on that consistency. Our quality system is certified to IATF 16949 and ISO 9001:2015, and we supply material certificates, first article inspection and dimensional reports on request. Features that need machined accuracy, such as bearing bores, can be machined after forming. See our sheet metal fabrication services page for full capabilities.

CMM inspection of automotive parts for IATF 16949 quality
Related Services

Related Services From One Fabricator

01automotive machined parts for blocks, fittings and tight-tolerance features
02automotive die casting when a formed bracket becomes a repeat cast part
03automotive prototyping to check fit before production
Get Started

Get a Quote for Automotive Sheet Metal Parts

Send your STEP file or flat pattern with material, thickness, finish and quantity. Our engineers will return a quote with DFM notes and a lead time, usually within hours.

Get Instant Quote
FAQ

Frequently Asked Questions

What is automotive sheet metal fabrication?

It is the cutting, bending, welding and finishing of thin sheet into automotive parts such as brackets, shields, battery boxes and enclosures. Compared with stamping, it needs no dedicated die, so it suits prototypes, low volumes and parts that change often.

Which materials do you fabricate for car parts?

Common choices are cold rolled and galvanized steel for brackets, stainless for heat shields and exhaust parts, and aluminum 5052 or 6061 for light enclosures and battery boxes. The right choice depends on strength, weight and corrosion needs.

Do you offer automotive metal stamping?

No. We do not offer high-volume stamping. We make sheet metal parts by laser cutting, CNC bending and welding, which suits prototypes and small to medium batches without die costs. For very high volumes, a stamping supplier is usually cheaper per part.

What tolerances can you hold on sheet metal parts?

General fabrication holds about ±0.25 mm, laser cut edges hold ±0.002 in, and bend angles are held tightly with springback compensation. Features that need tighter control can be machined after forming.

How fast can you deliver sheet metal prototypes?

Simple prototypes can ship in as little as 3 days. Parts with welding, hardware insertion or multi-step finishing take longer. We confirm the lead time in your quote after reviewing the drawing.

Let’s Build What’s Next

Partner With Tuowei Precision for CNC Machined Parts

From rapid prototypes to scalable production, Tuowei Precision delivers precision and consistency at every step, with the highest-quality CNC machined parts we can produce. Send your drawings and our team will reply within 24 hours.

  • Established engineering skills.
  • Global project support
  • Advanced CNC solutions
  • Co-creation of products.
  • Expandable capacity of production.
Get Instant Quote
🔒 All uploads are secure and confidential
Get In Touch With Us!
Prompt response guaranteed within 24 hours
🔐 All uploads are secure and confidential

Customer Reviews

Discover why businesses trust TUOWEI. Our clients value our precision, efficiency, and reliability, delivering seamless manufacturing solutions that consistently exceed expectations. Explore their experiences and success stories with our services.

— Related Industries —

Industry Expertise Beyond the Automotive Industry

With millions of precision components produced, Tuowei Precision serves a wide range of industries. The same tolerance and documentation discipline behind our automotive work also supports aerospace machining, robotics and medical device programs.

Explore Insights & Innovation

Read our latest guides on CNC machining, materials, finishing and industry trends to make better production decisions.