首页 » 博客 » Technical Guides » Types of Machining Tools: Lathe, Milling and Cutting Tools Explained

Types of Machining Tools: Lathe, Milling and Cutting Tools Explained

目录

拓维精密

需要专业的机械加工解决方案吗?拓维模型的团队随时准备为您提供全方位的制造支持。立即联系我们,获取您正在进行或即将开展的项目的报价!

Types of machining tools - end mills, drills, turning inserts, taps and reamers on machinist workbench

Every machined part is the sum of the tools that cut it. A machinist’s tool cabinet is organized around what each tool does: turning tools shape rotating stock, milling cutters carve prismatic features, drills and reamers make and size holes, taps cut threads, and finishing tools refine edges and surfaces. This guide walks through all the major types of machining tools — manual and CNC — with the selection logic competitor articles usually skip: which tool material for which workpiece, what the geometry angles actually do, and the parameters that keep tools alive.

The Main Categories of Machining Tools

Category 机器 Typical tools What they make
Turning tools Lathe Roughing, finishing, parting, grooving, threading, boring bars, knurling Shafts, pins, bushings, any rotational part
Milling cutters Milling machine / machining center End mills, face mills, ball nose, slab mills, T-slot, dovetail, fly cutters Flats, pockets, slots, 3D contours
Holemaking tools Drill press, lathe, mill Twist drills, center drills, reamers, boring tools, countersinks, counterbores Holes from rough to H7 precision
Threading tools Lathe, mill, by hand Taps, dies, thread mills, single-point threading inserts Internal and external threads
Abrasive / finishing Grinder, hone, lap Grinding wheels, honing stones, lapping plates, deburring tools Fine finishes, tight tolerances, edge breaks
Gear cutting Hobbing / shaping machine Hobs, gear shapers, broaches Gears, splines, keyways

Lathe Tools (Turning Tools)

Lathe turning tools are single-point: one cutting edge, fed against rotating stock. The essential set:

  • Roughing tools — strong nose, deep cuts, fast stock removal
  • Finishing tools — larger nose radius for fine Ra at light cuts
  • Parting / grooving blades — narrow blades that cut off parts or form O-ring and snap-ring grooves
  • Threading tools — 60° (metric/UN) or 55° (Whitworth) point, fed at the thread’s helix
  • Boring bars — internal single-point tools that enlarge and true existing holes; the longer the overhang, the more rigidity rules the setup
  • 滚花工具 — not a cutter: hardened wheels that press a grip pattern into the surface

Most CNC lathes run indexable carbide inserts (CNMG, DNMG, VNMG for turning; CCMT/DCMT for boring) clamped in standardized holders — a worn edge is indexed or swapped in seconds instead of reground. For a deeper dive see our lathe cutting tools guide 以及 CNC turning overview.

Milling Cutters

  • Flat end mills — the workhorse: 2 flutes for aluminum (chip room), 4+ flutes for steel (edge engagement)
  • Ball nose end mills — hemispherical tip for 3D contouring, mold cavities, fillets
  • Corner-radius (bull nose) end mills — tougher corner than a square end mill; leaves an internal fillet
  • Face mills — multi-insert heads, 50–200 mm, that flatten large surfaces fast
  • Roughing (corncob) end mills — serrated edges break chips and cut vibration at heavy stock removal
  • T-slot, dovetail and woodruff cutters — form cutters for machine-table slots, dovetail ways, keyseats
  • Chamfer mills and spot drills — edge breaks, deburring passes and accurate hole starts
  • Thread mills — helically interpolate internal threads; one tool covers a range of sizes and cannot break off in the hole like a tap

Holemaking Tools

工具 Accuracy Role
Center / spot drill - Starts the hole on location; prevents wander
Twist drill ±0.05–0.1 mm Makes the hole; 118° point general purpose, 135° split point for harder metals
Reamer IT6–IT8 (H7 fits) Sizes and finishes a drilled hole — see our reaming guide
Boring tool IT6–IT9 Corrects hole position and size single-point
Countersink / counterbore - Seats for flat-head and socket-head screws — see counterbore vs countersink

Tool Materials: What Cuts What

Tool material Hot hardness 最适合 相对成本
High-speed steel (HSS) to ~600 °C Low-speed work, taps, drills, interrupted cuts; tough and regrindable $
Cobalt HSS (M35/M42) higher Stainless and harder steels where carbide is too brittle $$
Cemented carbide to ~900 °C The CNC default: 3–5× HSS speeds in steel, aluminum, cast iron $$$
Cermet high Fine finishing of steels; excellent surface finish $$$
Ceramic to ~1200 °C Hard turning, superalloys (Inconel) at very high speed $$$$
CBN extreme Hardened steel (HRC 45+), replacing grinding $$$$$
PCD (polycrystalline diamond) - Aluminum, copper, composites, plastics; never ferrous metals $$$$$

Coatings multiply tool life: TiN (general, gold), TiCN (abrasive materials), TiAlN/AlTiN (high-heat dry machining — the modern default for steel), DLC and ZrN (non-stick for aluminum), diamond coating (graphite, composites).

Tool Geometry in One Minute

  • Rake angle — positive rake slices (lower forces, best for aluminum, stainless); negative rake supports the edge (hard materials, interrupted cuts)
  • Helix / flute angle — high helix (40–60°) lifts chips and cuts smoothly in aluminum; low helix (15–30°) stiffens the edge for steel
  • Relief (clearance) angle — keeps the flank from rubbing; too little burnishes, too much weakens the edge
  • Nose radius — bigger radius = stronger edge and better finish, but more radial pressure and chatter risk on thin parts

Matching Tool to Workpiece Material

工件 Tool choice Key parameter notes
铝质 2–3 flute carbide, polished or ZrN/DLC coated, PCD for volume High speed, generous chip room, sharp positive rake
Mild / alloy steel TiAlN-coated carbide, 4+ flutes Moderate speed, climb milling, flood or air blast
Stainless (304/316) Sharp coated carbide or cobalt HSS Low speed, constant feed — never dwell (work hardening)
钛 Sharp carbide, high-pressure coolant Low speed, high feed, maximum rigidity
Hardened steel HRC 45+ CBN inserts, ceramic Hard turning replaces grinding where geometry allows
工程塑料 Razor-sharp uncoated carbide, single/2 flute High speed, low heat — see plastic machining services

常见问题

What are the 7 basic types of machine tools?

The classic seven are the lathe, milling machine, drill press, grinder, shaper, planer and saw. Modern CNC machining centers combine milling, drilling, tapping and boring in one machine, and turning centers add live tooling to the lathe.

What types of tools are commonly used by machinists?

Cutting tools (end mills, drills, turning inserts, taps, reamers), measuring tools (micrometers, calipers, indicators, gauge pins), workholding (vises, chucks, clamps, fixtures), and hand finishing tools (files, deburring scrapers, stones).

What are the main CNC machining tools?

On machining centers: end mills, face mills, spot drills, twist drills, taps or thread mills, reamers and chamfer tools. On turning centers: indexable roughing and finishing inserts, grooving and threading inserts, and boring bars.

Which tool material should I default to?

Coated cemented carbide. It covers aluminum through alloy steel at production speeds. Step up to CBN or ceramic only for hardened materials, and down to HSS for low-speed, interrupted, or hand-tapping work.

The Right Tools, Already Dialed In

Tool selection, geometry and parameters are half the quality of a machined part. At Tuowei Precision our 数控加工服务 run TiAlN carbide, PCD and CBN tooling matched to each alloy — from 数控车削 of one-off shafts to million-piece turned parts production. Send your drawing for a 24-hour quote.

图为拓维模型的一名员工身穿蓝色Polo衫,站在工厂内背景模糊的数控机床前
关于作者
安迪

tuoweiprecision 制造工程师

作者:安迪,拓维模型制造工程师。. 安迪专攻数控加工、精密制造和生产工程领域,在从快速原型制作到大规模量产的整个项目过程中拥有丰富的实践经验。他与工程和制造团队紧密合作,共同评估材料、公差、加工工艺以及设计可制造性。 他的文章提供了实用且具有技术深度的见解,旨在帮助工程师和采购人员做出更明智的制造决策、优化生产效率,并确保零件质量的一致性。欢迎了解拓维模型的数控加工和定制制造解决方案,为您的下一个项目提供支持。.

让我们携手共创未来

与拓维模型携手,共同实现您的愿景

从快速原型制作到可扩展的生产,Tuowei Precision 提供可靠的数控加工服务,在每个环节都确保精度与一致性。立即启动您的项目。.

与我们联系!
保证在24小时内及时回复
🔐 所有上传内容均安全保密

探索洞察与创新

阅读我们关于数控加工、材料、表面处理及行业趋势的最新指南,以做出更明智的生产决策。

与我们联系!
保证在24小时内及时回复
🔐 所有上传内容均安全保密