首页 » 博客 » Technical Guides » Plastic Machining Services: Materials, Tolerances, and How to Choose the Right Polymer

Plastic Machining Services: Materials, Tolerances, and How to Choose the Right Polymer

目录

拓维精密

需要专业的机械加工解决方案吗?拓维模型的团队随时准备为您提供全方位的制造支持。立即联系我们,获取您正在进行或即将开展的项目的报价!

Plastic machining services - CNC milling a white POM Delrin engineering plastic part

Plastic machining services produce precision polymer parts by CNC milling, turning and drilling — no mold required. For prototypes, low-to-mid volumes, and high-performance materials like PEEK that are costly to mold, machining is usually the fastest and most economical route. But plastics behave nothing like metals on a machine: they expand with heat, spring away from the tool, and warp when internal stresses are released. This page covers the materials we machine, the tolerances that are realistic for each, how deformation is controlled, and when machining beats molding.

Plastic Machining Capabilities

Parameter 能力
流程 3/4/5-axis CNC milling, turning, drilling & tapping
零件尺寸 Up to 1,500 × 1,000 × 500 mm plates; Ø600 mm turned
标准公差 ±0.05 mm (POM, PEEK)
严格公差 ±0.02 mm with annealing and stabilized measurement
表面处理 Ra 0.8–1.6 µm machined; polished optical finish on PMMA/PC
Quantities 1 to ~5,000 parts (beyond that, consider injection molding)

Material Selection Table

材料 优势 注意事项 典型部件
POM / Acetal (Delrin) Most machinable; stiff, stable, low friction Hard to glue Gears, bushings, jigs — see POM/Delrin CNC machining
PEEK 250 °C continuous use, chemical resistance, strength Expensive; glass-filled grades abrasive Semiconductor, medical, aerospace
聚四氟乙烯(特氟龙) Lowest friction, inert, 260 °C Soft, creeps under load — loose tolerances Seals, valve seats, insulators
Nylon (PA6/PA66) Tough, wear-resistant, economical Absorbs moisture — dimensions drift ±0.2% Rollers, wear pads, sprockets
聚碳酸酯(PC) Transparent, impact-resistant Stress-cracks with aggressive coolants Guards, sight windows
聚甲基丙烯酸甲酯(丙烯酸) Optical clarity, polishes beautifully Brittle — sharp tools, gentle clamping Light guides, displays, manifolds
超高分子量聚乙烯 Best abrasion resistance, cheap Flexible — hard to hold flat tolerances Chute liners, wear strips
Ultem (PEI) Flame rated, 170 °C, strong Costly; notch-sensitive Aerospace interiors, sterilizable trays

Realistic Tolerances by Polymer

材料 标准 Achievable (annealed, 20 °C measured)
POM, PEEK ±0.05 毫米 ±0.02毫米
PC, PMMA, Ultem ±0.1 毫米 ±0.05 毫米
Nylon (dried) ±0.1 毫米 ±0.05 毫米
PTFE, UHMW ±0.1–0.2 mm ±0.05 mm small features

Specifying metal-like tolerances (±0.01 mm) on plastics drives cost and scrap without improving function — plastics expand ~5–10× more than steel per °C, so a POM part measured at 26 °C can read 0.03 mm larger per 100 mm than at 20 °C.

How We Control Deformation

  1. Stress-relief annealing before finishing cuts (POM ~150 °C, PEEK ~200 °C, slow ramps) releases extrusion stresses that would otherwise warp the part hours after machining.
  2. Symmetric material removal — removing stock evenly from both faces of plates keeps internal stresses balanced.
  3. Rough → rest → finish workflow for precision parts: ebauched parts stabilize 24 h before final dimensions are cut.
  4. Low-force fixturing — vacuum tables and wide-jaw clamping prevent elastic distortion that springs back after release.
  5. Sharp, polished tooling with high rake angles shears the plastic instead of melting it; air blast evacuates chips before they re-weld.
  6. Temperature-stabilized inspection — parts measured at 20 °C after resting, documented in the inspection report.

Machining vs Injection Molding: Break-Even

系数 数控加工 注塑成型
模具成本 无 Mold: $3,000–$50,000+
Lead time (first parts) 3–7 days 4–8 weeks
Unit cost at 100 pcs 低 Very high (mold amortized)
Unit cost at 50,000 pcs 高 非常低
Material options Any extruded stock incl. PEEK, PTFE Injectable grades only
Typical break-even ~2,000–10,000 parts depending on size and mold complexity

Many programs start machined, then shift to molding at volume — often keeping machining for post-mold critical features.

常见问题

What plastics are best for CNC machining?

POM (Delrin) is the gold standard: rigid, stable and fast-cutting with excellent tolerances. PEEK machines well for high-temperature service; PTFE and UHMW machine easily but hold looser tolerances due to softness.

What tolerance can plastic machining hold?

±0.05 mm is standard on stable polymers like POM and PEEK; ±0.02 mm is achievable with annealing and controlled measurement. Soft materials like PTFE are realistic at ±0.1 mm.

Why did my machined nylon part change size?

Nylon absorbs up to 2–3% moisture, growing roughly 0.2% in dimension. Precision nylon parts should be machined from dried stock and specified with moisture-conditioned tolerances.

Is machining or injection molding cheaper for plastic parts?

Below a few thousand parts, machining wins (no mold cost, days not weeks). Above ~5,000–10,000 parts of a stable design, molding’s lower unit price pays back the mold.

Plastic Machining at Tuowei Precision

Tuowei Precision machines POM, PEEK, PTFE, Nylon, PC, PMMA, UHMW and Ultem on 3- to 5-axis CNC centers, with stress-relief annealing and temperature-stabilized inspection reports. Pair plastic parts with metal components from our 数控加工服务, or move to volume with contract machining. For tiny polymer components, see micro machined parts. Upload your STEP file for a quote in 24 hours.

图为拓维模型的一名员工身穿蓝色Polo衫,站在工厂内背景模糊的数控机床前
关于作者
安迪

tuoweiprecision 制造工程师

作者:安迪,拓维模型制造工程师。. 安迪专攻数控加工、精密制造和生产工程领域,在从快速原型制作到大规模量产的整个项目过程中拥有丰富的实践经验。他与工程和制造团队紧密合作,共同评估材料、公差、加工工艺以及设计可制造性。 他的文章提供了实用且具有技术深度的见解,旨在帮助工程师和采购人员做出更明智的制造决策、优化生产效率,并确保零件质量的一致性。欢迎了解拓维模型的数控加工和定制制造解决方案,为您的下一个项目提供支持。.

让我们携手共创未来

与拓维模型携手,共同实现您的愿景

从快速原型制作到可扩展的生产,Tuowei Precision 提供可靠的数控加工服务,在每个环节都确保精度与一致性。立即启动您的项目。.

与我们联系!
保证在24小时内及时回复
🔐 所有上传内容均安全保密

探索洞察与创新

阅读我们关于数控加工、材料、表面处理及行业趋势的最新指南,以做出更明智的生产决策。

与我们联系!
保证在24小时内及时回复
🔐 所有上传内容均安全保密