専門的な機械加工ソリューションをお探しですか?Tuowei Precisionのチームが、お客様のあらゆる製造ニーズにお応えします。現在進行中または今後予定されているプロジェクトのお見積もりについては、ぜひ今すぐお問い合わせください!
Every machined part is the sum of the tools that cut it. A machinist’s tool cabinet is organized around what each tool does: turning tools shape rotating stock, milling cutters carve prismatic features, drills and reamers make and size holes, taps cut threads, and finishing tools refine edges and surfaces. This guide walks through all the major types of machining tools — manual and CNC — with the selection logic competitor articles usually skip: which tool material for which workpiece, what the geometry angles actually do, and the parameters that keep tools alive.
| Category | 機械 | Typical tools | What they make |
|---|---|---|---|
| Turning tools | Lathe | Roughing, finishing, parting, grooving, threading, boring bars, knurling | Shafts, pins, bushings, any rotational part |
| Milling cutters | Milling machine / machining center | End mills, face mills, ball nose, slab mills, T-slot, dovetail, fly cutters | Flats, pockets, slots, 3D contours |
| Holemaking tools | Drill press, lathe, mill | Twist drills, center drills, reamers, boring tools, countersinks, counterbores | Holes from rough to H7 precision |
| Threading tools | Lathe, mill, by hand | Taps, dies, thread mills, single-point threading inserts | Internal and external threads |
| Abrasive / finishing | Grinder, hone, lap | Grinding wheels, honing stones, lapping plates, deburring tools | Fine finishes, tight tolerances, edge breaks |
| Gear cutting | Hobbing / shaping machine | Hobs, gear shapers, broaches | Gears, splines, keyways |
Lathe turning tools are single-point: one cutting edge, fed against rotating stock. The essential set:
Most CNC lathes run indexable carbide inserts (CNMG, DNMG, VNMG for turning; CCMT/DCMT for boring) clamped in standardized holders — a worn edge is indexed or swapped in seconds instead of reground. For a deeper dive see our lathe cutting tools guide そして、その CNC turning overview.
| 工具 | Accuracy | Role |
|---|---|---|
| Center / spot drill | — | Starts the hole on location; prevents wander |
| Twist drill | ±0.05–0.1 mm | Makes the hole; 118° point general purpose, 135° split point for harder metals |
| Reamer | IT6–IT8 (H7 fits) | Sizes and finishes a drilled hole — see our reaming guide |
| Boring tool | IT6–IT9 | Corrects hole position and size single-point |
| Countersink / counterbore | — | Seats for flat-head and socket-head screws — see counterbore vs countersink |
| Tool material | Hot hardness | こんな方に最適 | 相対的なコスト |
|---|---|---|---|
| High-speed steel (HSS) | to ~600 °C | Low-speed work, taps, drills, interrupted cuts; tough and regrindable | $ |
| Cobalt HSS (M35/M42) | higher | Stainless and harder steels where carbide is too brittle | $$ |
| Cemented carbide | to ~900 °C | The CNC default: 3–5× HSS speeds in steel, aluminum, cast iron | $$$ |
| Cermet | high | Fine finishing of steels; excellent surface finish | $$$ |
| Ceramic | to ~1200 °C | Hard turning, superalloys (Inconel) at very high speed | $$$$ |
| CBN | extreme | Hardened steel (HRC 45+), replacing grinding | $$$$$ |
| PCD (polycrystalline diamond) | — | Aluminum, copper, composites, plastics; never ferrous metals | $$$$$ |
Coatings multiply tool life: TiN (general, gold), TiCN (abrasive materials), TiAlN/AlTiN (high-heat dry machining — the modern default for steel), DLC and ZrN (non-stick for aluminum), diamond coating (graphite, composites).
| 被加工物 | Tool choice | Key parameter notes |
|---|---|---|
| アルミニウム | 2–3 flute carbide, polished or ZrN/DLC coated, PCD for volume | High speed, generous chip room, sharp positive rake |
| Mild / alloy steel | TiAlN-coated carbide, 4+ flutes | Moderate speed, climb milling, flood or air blast |
| Stainless (304/316) | Sharp coated carbide or cobalt HSS | Low speed, constant feed — never dwell (work hardening) |
| チタン | Sharp carbide, high-pressure coolant | Low speed, high feed, maximum rigidity |
| Hardened steel HRC 45+ | CBN inserts, ceramic | Hard turning replaces grinding where geometry allows |
| エンジニアリングプラスチック | Razor-sharp uncoated carbide, single/2 flute | High speed, low heat — see plastic machining services |
The classic seven are the lathe, milling machine, drill press, grinder, shaper, planer and saw. Modern CNC machining centers combine milling, drilling, tapping and boring in one machine, and turning centers add live tooling to the lathe.
Cutting tools (end mills, drills, turning inserts, taps, reamers), measuring tools (micrometers, calipers, indicators, gauge pins), workholding (vises, chucks, clamps, fixtures), and hand finishing tools (files, deburring scrapers, stones).
On machining centers: end mills, face mills, spot drills, twist drills, taps or thread mills, reamers and chamfer tools. On turning centers: indexable roughing and finishing inserts, grooving and threading inserts, and boring bars.
Coated cemented carbide. It covers aluminum through alloy steel at production speeds. Step up to CBN or ceramic only for hardened materials, and down to HSS for low-speed, interrupted, or hand-tapping work.
Tool selection, geometry and parameters are half the quality of a machined part. At Tuowei Precision our CNC加工サービス run TiAlN carbide, PCD and CBN tooling matched to each alloy — from CNC旋盤加工 of one-off shafts to million-piece turned parts production. Send your drawing for a 24-hour quote.
執筆:TUOWEI Precisionの製造エンジニア、アンディ。. アンディは、CNC加工、精密製造、生産工学を専門としており、ラピッドプロトタイピングから本格生産に至るまでのプロジェクト支援において、実務経験を有しています。彼は、エンジニアリングチームや製造チームと緊密に連携し、材料、公差、加工プロセス、および設計の製造適性を評価しています。 彼の記事は、実用的かつ技術的な知見に裏打ちされた洞察を提供し、エンジニアや購買担当者がより適切な製造上の意思決定を行い、生産効率を最適化し、一貫した部品品質を実現できるよう支援しています。次回のプロジェクトには、TUOWEI PrecisionのCNC加工およびカスタム製造ソリューションをご検討ください。.
ラピッドプロトタイピングから量産に至るまで、Tuowei Precisionは、あらゆる工程において精度と一貫性を兼ね備えた信頼性の高いCNC加工を提供します。今すぐプロジェクトを始めましょう。.
CNC加工、材料、仕上げ、業界の動向に関する最新のガイドをご覧いただき、より適切な生産判断を行ってください。