首页 » 博客 » Technical Guides » PVC vs Polypropylene vs Polycarbonate: Properties, Cost and How to Choose

PVC vs Polypropylene vs Polycarbonate: Properties, Cost and How to Choose

目录

拓维精密

需要专业的机械加工解决方案吗?拓维模型的团队随时准备为您提供全方位的制造支持。立即联系我们,获取您正在进行或即将开展的项目的报价!

PVC vs polypropylene vs polycarbonate - pipe fittings, PP containers and clear PC machined parts

PVC, polypropylene (PP) and polycarbonate (PC) are three of the most used thermoplastics on earth, and they get confused constantly because all three show up in pipes, housings and containers. They could hardly be more different: PVC is the cheap, flame-resistant chemical workhorse; polypropylene is the light, fatigue-proof, food-safe one; polycarbonate is the transparent tank. This guide compares all three with complete property data — including the density and modulus numbers most comparisons omit — plus cost and processing guidance for molding and machining.

The Three Plastics in One Table

物业 PVC (rigid) 聚丙烯(PP) 聚碳酸酯(PC)
密度 1.38–1.45 g/cm³ 0.90–0.92 g/cm³ (floats!) 1.20–1.22 g/cm³
抗拉强度 40–55 MPa 25–40 MPa 55–70 MPa
拉伸模量 2.4–3.3 GPa 1.1–1.6 GPa 2.2–2.4 GPa
Izod impact (notched) 2–10 kJ/m² 3–8 kJ/m² (copolymer higher) 60–85 kJ/m² — virtually unbreakable
Max continuous temp 60 °C (CPVC ~95 °C) 100 °C 115–130 °C
Heat deflection (0.45 MPa) ~70 °C ~85–100 °C ~140 °C
Transparency Clear grades hazy Translucent at best Water-clear, 88–91% transmission
Flammability Self-extinguishing (UL94 V-0 typical) Burns (HB) V-2 to V-0 grades
Water absorption (24 h) 0.04–0.4% <0.02% — best of the three 0.15–0.35%
Typical resin cost ~$0.9–1.3/kg ~$1.0–1.4/kg ~$2.5–4.0/kg

PVC: The Chemical and Flame Workhorse

Polyvinyl chloride owes its career to chlorine: inherent flame resistance, broad chemical resistance (acids, bases, salts, oils) and the lowest price of the three. Rigid PVC (uPVC) builds pipes, fittings, window frames and tanks; plasticized PVC becomes cable insulation, hose and seals. Weaknesses: low service temperature (softens near 80 °C), brittle in cold, attacked by many solvents (ketones, chlorinated solvents), and it releases HCl when burned — which is why machining it calls for ventilation and why some shops decline it.

Polypropylene: Light, Fatigue-Proof, Food-Safe

PP is the lightest major engineering plastic — it floats — with outstanding fatigue resistance: a molded-in PP living hinge survives millions of flex cycles, which neither PVC nor PC can do. It shrugs off acids and bases even better than PVC, absorbs almost no water, and is FDA-friendly in food-contact grades. Weaknesses: UV degradation unless stabilized, poor bonding and painting (low surface energy), soft surface that scratches, and brittleness below 0 °C (copolymer grades fix this partially). See our polypropylene CNC machining service for tolerances and design notes.

Polycarbonate: The Transparent Tank

PC is the impact champion of common thermoplastics — riot shields, machine guards, safety glasses — with glass-like clarity and the highest temperature capability of the three. It machines beautifully and molds into precise, stable parts. Weaknesses: scratches without hard-coating, stress-cracks in contact with many chemicals (ammonia, ketones, some oils), hydrolyzes in hot water over time, and costs 2–4× the other two. More in our polycarbonate injection molding guide 和 PC machining service.

Chemical Resistance Quick Matrix

中型 聚氯乙烯 聚丙烯 个人电脑
Dilute acids 优秀 优秀 公平
Strong bases 好 优秀 Poor (attacked)
Alcohols 好 优秀 公平
Ketones / chlorinated solvents 差 好 Poor (crazing)
Fuels and oils 好 Fair (swells warm) Poor–Fair
Hot water / steam 差 Good (to ~100 °C) Poor (hydrolysis)

Which One for Your Application?

  • Piping, fittings, outdoor profiles, electrical conduit: PVC — cost, flame rating and weatherability (with TiO2 stabilization) win.
  • Chemical tanks, lab ware, living hinges, food containers, battery cases: PP — chemistry plus fatigue plus purity.
  • Clear guards, lenses, housings that get dropped, sterilizable medical parts (limited cycles): PC — nothing else combines clarity and impact.
  • Machined prototypes and low-volume parts: all three CNC-machine well; PP needs sharp tools and gentle clamping (it flexes), PVC needs ventilation, PC needs stress-relief awareness. Our plastic machining services hold ±0.05 mm or tighter on all three without mold costs.

常见问题

Is PP stronger than PVC?

No in tension and stiffness — rigid PVC is roughly 40% stronger and twice as stiff. But PP wins on fatigue (flex cycles), impact at matching grades, strength-to-weight, and chemical breadth. “Stronger” depends on the load you mean.

What are the disadvantages of polypropylene?

UV sensitivity unless stabilized, poor paintability and bondability, a soft easily-scratched surface, cold-temperature brittleness, flammability, and high mold shrinkage (1–2.5%) that demands good tooling for tight tolerances.

Is PVC or polycarbonate better for clear parts?

Polycarbonate, decisively: 88–91% light transmission, 10–30× the impact resistance, and nearly double the temperature capability. Clear PVC exists but is hazier, more brittle and limited to ~60 °C — its advantage is price and flame rating.

Which is cheapest: PVC, PP or polycarbonate?

PVC and PP resins are close (roughly $1–1.4/kg in 2026), with PVC usually slightly cheaper and PP cheaper per part by volume thanks to its low density. Polycarbonate runs 2–4× either. For machined parts, material is a minor cost next to machine time, so choose by properties first.

Plastic Parts From Tuowei Precision

We machine and mold PVC, PP, PC and 20+ other engineering plastics — prototypes without tooling via plastic machining, production via 注塑. Material selection help is free: send your part’s environment and loads with your drawing for a 24-hour quote.

图为拓维模型的一名员工身穿蓝色Polo衫,站在工厂内背景模糊的数控机床前
关于作者
安迪

tuoweiprecision 制造工程师

作者:安迪,拓维模型制造工程师。. 安迪专攻数控加工、精密制造和生产工程领域,在从快速原型制作到大规模量产的整个项目过程中拥有丰富的实践经验。他与工程和制造团队紧密合作,共同评估材料、公差、加工工艺以及设计可制造性。 他的文章提供了实用且具有技术深度的见解,旨在帮助工程师和采购人员做出更明智的制造决策、优化生产效率,并确保零件质量的一致性。欢迎了解拓维模型的数控加工和定制制造解决方案,为您的下一个项目提供支持。.

让我们携手共创未来

与拓维模型携手,共同实现您的愿景

从快速原型制作到可扩展的生产,Tuowei Precision 提供可靠的数控加工服务,在每个环节都确保精度与一致性。立即启动您的项目。.

与我们联系!
保证在24小时内及时回复
🔐 所有上传内容均安全保密

探索洞察与创新

阅读我们关于数控加工、材料、表面处理及行业趋势的最新指南,以做出更明智的生产决策。

与我们联系!
保证在24小时内及时回复
🔐 所有上传内容均安全保密