Vous avez besoin de solutions d'usinage spécialisées ? L'équipe de Tuowei Precision est là pour répondre à tous vos besoins en matière de fabrication. Contactez-nous dès aujourd'hui pour obtenir un devis concernant vos projets en cours ou à venir !
PVC, polypropylene (PP) and polycarbonate (PC) are three of the most used thermoplastics on earth, and they get confused constantly because all three show up in pipes, housings and containers. They could hardly be more different: PVC is the cheap, flame-resistant chemical workhorse; polypropylene is the light, fatigue-proof, food-safe one; polycarbonate is the transparent tank. This guide compares all three with complete property data — including the density and modulus numbers most comparisons omit — plus cost and processing guidance for molding and machining.
| Propriété | PVC (rigid) | Polypropylène (PP) | Polycarbonate (PC) |
|---|---|---|---|
| Densité | 1.38–1.45 g/cm³ | 0.90–0.92 g/cm³ (floats!) | 1.20–1.22 g/cm³ |
| Résistance à la traction | 40–55 MPa | 25–40 MPa | 55–70 MPa |
| Module de traction | 2.4–3.3 GPa | 1.1–1.6 GPa | 2.2–2.4 GPa |
| Izod impact (notched) | 2–10 kJ/m² | 3–8 kJ/m² (copolymer higher) | 60–85 kJ/m² — virtually unbreakable |
| Max continuous temp | 60 °C (CPVC ~95 °C) | 100 °C | 115–130 °C |
| Heat deflection (0.45 MPa) | ~70 °C | ~85–100 °C | ~140 °C |
| Transparency | Clear grades hazy | Translucent at best | Water-clear, 88–91% transmission |
| Flammability | Self-extinguishing (UL94 V-0 typical) | Burns (HB) | V-2 to V-0 grades |
| Water absorption (24 h) | 0.04–0.4% | <0.02% — best of the three | 0.15–0.35% |
| Typical resin cost | ~$0.9–1.3/kg | ~$1.0–1.4/kg | ~$2.5–4.0/kg |
Polyvinyl chloride owes its career to chlorine: inherent flame resistance, broad chemical resistance (acids, bases, salts, oils) and the lowest price of the three. Rigid PVC (uPVC) builds pipes, fittings, window frames and tanks; plasticized PVC becomes cable insulation, hose and seals. Weaknesses: low service temperature (softens near 80 °C), brittle in cold, attacked by many solvents (ketones, chlorinated solvents), and it releases HCl when burned — which is why machining it calls for ventilation and why some shops decline it.
PP is the lightest major engineering plastic — it floats — with outstanding fatigue resistance: a molded-in PP living hinge survives millions of flex cycles, which neither PVC nor PC can do. It shrugs off acids and bases even better than PVC, absorbs almost no water, and is FDA-friendly in food-contact grades. Weaknesses: UV degradation unless stabilized, poor bonding and painting (low surface energy), soft surface that scratches, and brittleness below 0 °C (copolymer grades fix this partially). See our polypropylene CNC machining service for tolerances and design notes.
PC is the impact champion of common thermoplastics — riot shields, machine guards, safety glasses — with glass-like clarity and the highest temperature capability of the three. It machines beautifully and molds into precise, stable parts. Weaknesses: scratches without hard-coating, stress-cracks in contact with many chemicals (ammonia, ketones, some oils), hydrolyzes in hot water over time, and costs 2–4× the other two. More in our polycarbonate injection molding guide et PC machining service.
| Moyen | PVC | PP | PC |
|---|---|---|---|
| Dilute acids | Excellent | Excellent | Juste |
| Strong bases | Bon | Excellent | Poor (attacked) |
| Alcohols | Bon | Excellent | Juste |
| Ketones / chlorinated solvents | Mauvais | Bon | Poor (crazing) |
| Fuels and oils | Bon | Fair (swells warm) | Poor–Fair |
| Hot water / steam | Mauvais | Good (to ~100 °C) | Poor (hydrolysis) |
No in tension and stiffness — rigid PVC is roughly 40% stronger and twice as stiff. But PP wins on fatigue (flex cycles), impact at matching grades, strength-to-weight, and chemical breadth. “Stronger” depends on the load you mean.
UV sensitivity unless stabilized, poor paintability and bondability, a soft easily-scratched surface, cold-temperature brittleness, flammability, and high mold shrinkage (1–2.5%) that demands good tooling for tight tolerances.
Polycarbonate, decisively: 88–91% light transmission, 10–30× the impact resistance, and nearly double the temperature capability. Clear PVC exists but is hazier, more brittle and limited to ~60 °C — its advantage is price and flame rating.
PVC and PP resins are close (roughly $1–1.4/kg in 2026), with PVC usually slightly cheaper and PP cheaper per part by volume thanks to its low density. Polycarbonate runs 2–4× either. For machined parts, material is a minor cost next to machine time, so choose by properties first.
We machine and mold PVC, PP, PC and 20+ other engineering plastics — prototypes without tooling via plastic machining, production via moulage par injection. Material selection help is free: send your part’s environment and loads with your drawing for a 24-hour quote.
Rédigé par Andy, ingénieur de production chez TUOWEI Precision. Andy est spécialisé dans l'usinage CNC, la fabrication de précision et l'ingénierie de production. Il possède une expérience pratique dans l'accompagnement de projets, du prototypage rapide à la production à grande échelle. Il travaille en étroite collaboration avec les équipes d'ingénierie et de fabrication pour évaluer les matériaux, les tolérances, les procédés d'usinage et la fabricabilité des conceptions. Ses articles offrent des conseils pratiques et techniquement fondés pour aider les ingénieurs et les acheteurs à prendre de meilleures décisions en matière de fabrication, à optimiser l’efficacité de la production et à garantir une qualité constante des pièces. Découvrez les solutions d’usinage CNC et de fabrication sur mesure de TUOWEI Precision pour votre prochain projet.
Du prototypage rapide à la production à grande échelle, Tuowei Precision propose des services d'usinage CNC fiables, alliant précision et régularité à chaque étape. Lancez votre projet dès aujourd'hui.
Consultez nos derniers guides sur l'usinage CNC, les matériaux, les finitions et les tendances du secteur pour prendre de meilleures décisions en matière de production.