جدول المحتويات

دقة تووي

هل تحتاج إلى حلول متخصصة في مجال التصنيع الآلي؟ فريقنا في Tuowei Precision جاهز لمساعدتك في تلبية جميع احتياجاتك التصنيعية. تواصل معنا اليوم للحصول على عرض أسعار لمشاريعك الجارية أو المرتقبة!

PVC vs polypropylene vs polycarbonate - pipe fittings, PP containers and clear PC machined parts

PVC, polypropylene (PP) and polycarbonate (PC) are three of the most used thermoplastics on earth, and they get confused constantly because all three show up in pipes, housings and containers. They could hardly be more different: PVC is the cheap, flame-resistant chemical workhorse; polypropylene is the light, fatigue-proof, food-safe one; polycarbonate is the transparent tank. This guide compares all three with complete property data — including the density and modulus numbers most comparisons omit — plus cost and processing guidance for molding and machining.

The Three Plastics in One Table

الممتلكات PVC (rigid) البولي بروبلين (PP) البولي كربونات (PC)
الكثافة 1.38–1.45 g/cm³ 0.90–0.92 g/cm³ (floats!) 1.20–1.22 g/cm³
قوة الشد 40–55 MPa 25–40 MPa 55–70 MPa
معامل الشد 2.4–3.3 GPa 1.1–1.6 GPa 2.2–2.4 GPa
Izod impact (notched) 2–10 kJ/m² 3–8 kJ/m² (copolymer higher) 60–85 kJ/m² — virtually unbreakable
Max continuous temp 60 °C (CPVC ~95 °C) 100 درجة مئوية 115–130 °C
Heat deflection (0.45 MPa) ~70 °C ~85–100 °C ~140 °C
Transparency Clear grades hazy Translucent at best Water-clear, 88–91% transmission
Flammability Self-extinguishing (UL94 V-0 typical) Burns (HB) V-2 to V-0 grades
Water absorption (24 h) 0.04–0.4% <0.02% — best of the three 0.15–0.35%
Typical resin cost ~$0.9–1.3/kg ~$1.0–1.4/kg ~$2.5–4.0/kg

PVC: The Chemical and Flame Workhorse

Polyvinyl chloride owes its career to chlorine: inherent flame resistance, broad chemical resistance (acids, bases, salts, oils) and the lowest price of the three. Rigid PVC (uPVC) builds pipes, fittings, window frames and tanks; plasticized PVC becomes cable insulation, hose and seals. Weaknesses: low service temperature (softens near 80 °C), brittle in cold, attacked by many solvents (ketones, chlorinated solvents), and it releases HCl when burned — which is why machining it calls for ventilation and why some shops decline it.

Polypropylene: Light, Fatigue-Proof, Food-Safe

PP is the lightest major engineering plastic — it floats — with outstanding fatigue resistance: a molded-in PP living hinge survives millions of flex cycles, which neither PVC nor PC can do. It shrugs off acids and bases even better than PVC, absorbs almost no water, and is FDA-friendly in food-contact grades. Weaknesses: UV degradation unless stabilized, poor bonding and painting (low surface energy), soft surface that scratches, and brittleness below 0 °C (copolymer grades fix this partially). See our polypropylene CNC machining service for tolerances and design notes.

Polycarbonate: The Transparent Tank

PC is the impact champion of common thermoplastics — riot shields, machine guards, safety glasses — with glass-like clarity and the highest temperature capability of the three. It machines beautifully and molds into precise, stable parts. Weaknesses: scratches without hard-coating, stress-cracks in contact with many chemicals (ammonia, ketones, some oils), hydrolyzes in hot water over time, and costs 2–4× the other two. More in our polycarbonate injection molding guide و PC machining service.

Chemical Resistance Quick Matrix

متوسط بولي كلوريد الفينيل ص كمبيوتر شخصي
Dilute acids ممتاز ممتاز عادلة
Strong bases جيد ممتاز Poor (attacked)
Alcohols جيد ممتاز عادلة
Ketones / chlorinated solvents ضعيف جيد Poor (crazing)
Fuels and oils جيد Fair (swells warm) Poor–Fair
Hot water / steam ضعيف Good (to ~100 °C) Poor (hydrolysis)

Which One for Your Application?

  • Piping, fittings, outdoor profiles, electrical conduit: PVC — cost, flame rating and weatherability (with TiO2 stabilization) win.
  • Chemical tanks, lab ware, living hinges, food containers, battery cases: PP — chemistry plus fatigue plus purity.
  • Clear guards, lenses, housings that get dropped, sterilizable medical parts (limited cycles): PC — nothing else combines clarity and impact.
  • Machined prototypes and low-volume parts: all three CNC-machine well; PP needs sharp tools and gentle clamping (it flexes), PVC needs ventilation, PC needs stress-relief awareness. Our plastic machining services hold ±0.05 mm or tighter on all three without mold costs.

الأسئلة الشائعة

Is PP stronger than PVC?

No in tension and stiffness — rigid PVC is roughly 40% stronger and twice as stiff. But PP wins on fatigue (flex cycles), impact at matching grades, strength-to-weight, and chemical breadth. “Stronger” depends on the load you mean.

What are the disadvantages of polypropylene?

UV sensitivity unless stabilized, poor paintability and bondability, a soft easily-scratched surface, cold-temperature brittleness, flammability, and high mold shrinkage (1–2.5%) that demands good tooling for tight tolerances.

Is PVC or polycarbonate better for clear parts?

Polycarbonate, decisively: 88–91% light transmission, 10–30× the impact resistance, and nearly double the temperature capability. Clear PVC exists but is hazier, more brittle and limited to ~60 °C — its advantage is price and flame rating.

Which is cheapest: PVC, PP or polycarbonate?

PVC and PP resins are close (roughly $1–1.4/kg in 2026), with PVC usually slightly cheaper and PP cheaper per part by volume thanks to its low density. Polycarbonate runs 2–4× either. For machined parts, material is a minor cost next to machine time, so choose by properties first.

Plastic Parts From Tuowei Precision

We machine and mold PVC, PP, PC and 20+ other engineering plastics — prototypes without tooling via plastic machining, production via القولبة بالحقن. Material selection help is free: send your part’s environment and loads with your drawing for a 24-hour quote.

صورة لأحد أعضاء فريق «تووي بريسيشن» يرتدي قميص بولو أزرق أمام آلات CNC غير واضحة المعالم في المصنع
نبذة عن المؤلف
آندي

مهندس تصنيع في شركة tuoweiprecision

بقلم آندي، مهندس تصنيع في شركة TUOWEI Precision. يتخصص آندي في التصنيع باستخدام الحاسب الآلي (CNC) والتصنيع الدقيق وهندسة الإنتاج، ويتمتع بخبرة عملية في دعم المشاريع بدءًا من النماذج الأولية السريعة وصولًا إلى الإنتاج على نطاق واسع. وهو يعمل عن كثب مع فرق الهندسة والتصنيع لتقييم المواد والتفاوتات المسموح بها وعمليات التصنيع وقابلية التصميم للتصنيع. تقدم مقالاته رؤى عملية ومستندة إلى المعرفة التقنية لمساعدة المهندسين والمشترين على اتخاذ قرارات تصنيع أفضل، وتحسين كفاءة الإنتاج، وتحقيق جودة متسقة للأجزاء. اكتشف حلول التصنيع باستخدام الحاسب الآلي (CNC) والتصنيع المخصص التي تقدمها TUOWEI Precision لمشروعك القادم.

لنبني المستقبل معًا

تعاون مع شركة «تووي بريسيجن» لتحويل رؤيتك إلى واقع

بدءًا من النماذج الأولية السريعة وصولاً إلى الإنتاج القابل للتوسع، تقدم شركة Tuowei Precision خدمات تصنيع موثوقة باستخدام الحاسب الآلي (CNC) تتسم بالدقة والاتساق في كل خطوة. ابدأ مشروعك اليوم.

تواصل معنا!
نضمن الرد السريع في غضون 24 ساعة
🔐 جميع التحميلات آمنة وسرية

استكشف الرؤى والابتكار

اقرأ أحدث أدلةنا حول التصنيع باستخدام الحاسب الآلي (CNC) والمواد والتشطيب واتجاهات الصناعة لاتخاذ قرارات إنتاجية أفضل.

تواصل معنا!
نضمن الرد السريع في غضون 24 ساعة
🔐 جميع التحميلات آمنة وسرية