جدول المحتويات

دقة تووي

هل تحتاج إلى حلول متخصصة في مجال التصنيع الآلي؟ فريقنا في Tuowei Precision جاهز لمساعدتك في تلبية جميع احتياجاتك التصنيعية. تواصل معنا اليوم للحصول على عرض أسعار لمشاريعك الجارية أو المرتقبة!

Plastic machining services - CNC milling a white POM Delrin engineering plastic part

Plastic machining services produce precision polymer parts by CNC milling, turning and drilling — no mold required. For prototypes, low-to-mid volumes, and high-performance materials like PEEK that are costly to mold, machining is usually the fastest and most economical route. But plastics behave nothing like metals on a machine: they expand with heat, spring away from the tool, and warp when internal stresses are released. This page covers the materials we machine, the tolerances that are realistic for each, how deformation is controlled, and when machining beats molding.

Plastic Machining Capabilities

Parameter القدرة
العمليات 3/4/5-axis CNC milling, turning, drilling & tapping
حجم القطعة Up to 1,500 × 1,000 × 500 mm plates; Ø600 mm turned
التفاوت المعياري ±0.05 mm (POM, PEEK)
تفاوت ضيق ±0.02 mm with annealing and stabilized measurement
تشطيب السطح Ra 0.8–1.6 µm machined; polished optical finish on PMMA/PC
Quantities 1 to ~5,000 parts (beyond that, consider injection molding)

Material Selection Table

المواد نقاط القوة أمور يجب الانتباه إليها الأجزاء النموذجية
POM / Acetal (Delrin) Most machinable; stiff, stable, low friction Hard to glue Gears, bushings, jigs — see POM/Delrin CNC machining
PEEK 250 °C continuous use, chemical resistance, strength Expensive; glass-filled grades abrasive Semiconductor, medical, aerospace
PTFE (تفلون) Lowest friction, inert, 260 °C Soft, creeps under load — loose tolerances Seals, valve seats, insulators
Nylon (PA6/PA66) Tough, wear-resistant, economical Absorbs moisture — dimensions drift ±0.2% Rollers, wear pads, sprockets
البولي كربونات (PC) Transparent, impact-resistant Stress-cracks with aggressive coolants Guards, sight windows
PMMA (أكريليك) Optical clarity, polishes beautifully Brittle — sharp tools, gentle clamping Light guides, displays, manifolds
UHMW-PE Best abrasion resistance, cheap Flexible — hard to hold flat tolerances Chute liners, wear strips
Ultem (PEI) Flame rated, 170 °C, strong Costly; notch-sensitive Aerospace interiors, sterilizable trays

Realistic Tolerances by Polymer

المواد قياسي Achievable (annealed, 20 °C measured)
POM, PEEK ±0.05 مم ± 0.02 مم
PC, PMMA, Ultem ±0.1 مم ±0.05 مم
Nylon (dried) ±0.1 مم ±0.05 مم
PTFE, UHMW ±0.1–0.2 mm ±0.05 mm small features

Specifying metal-like tolerances (±0.01 mm) on plastics drives cost and scrap without improving function — plastics expand ~5–10× more than steel per °C, so a POM part measured at 26 °C can read 0.03 mm larger per 100 mm than at 20 °C.

How We Control Deformation

  1. Stress-relief annealing before finishing cuts (POM ~150 °C, PEEK ~200 °C, slow ramps) releases extrusion stresses that would otherwise warp the part hours after machining.
  2. Symmetric material removal — removing stock evenly from both faces of plates keeps internal stresses balanced.
  3. Rough → rest → finish workflow for precision parts: ebauched parts stabilize 24 h before final dimensions are cut.
  4. Low-force fixturing — vacuum tables and wide-jaw clamping prevent elastic distortion that springs back after release.
  5. Sharp, polished tooling with high rake angles shears the plastic instead of melting it; air blast evacuates chips before they re-weld.
  6. Temperature-stabilized inspection — parts measured at 20 °C after resting, documented in the inspection report.

Machining vs Injection Molding: Break-Even

العامل التصنيع الآلي باستخدام الحاسب الآلي القولبة بالحقن
تكلفة الأدوات لا يوجد Mold: $3,000–$50,000+
Lead time (first parts) 3–7 days 4–8 weeks
Unit cost at 100 pcs منخفضة Very high (mold amortized)
Unit cost at 50,000 pcs عالية منخفض جدًّا
Material options Any extruded stock incl. PEEK, PTFE Injectable grades only
Typical break-even ~2,000–10,000 parts depending on size and mold complexity

Many programs start machined, then shift to molding at volume — often keeping machining for post-mold critical features.

الأسئلة الشائعة

What plastics are best for CNC machining?

POM (Delrin) is the gold standard: rigid, stable and fast-cutting with excellent tolerances. PEEK machines well for high-temperature service; PTFE and UHMW machine easily but hold looser tolerances due to softness.

What tolerance can plastic machining hold?

±0.05 mm is standard on stable polymers like POM and PEEK; ±0.02 mm is achievable with annealing and controlled measurement. Soft materials like PTFE are realistic at ±0.1 mm.

Why did my machined nylon part change size?

Nylon absorbs up to 2–3% moisture, growing roughly 0.2% in dimension. Precision nylon parts should be machined from dried stock and specified with moisture-conditioned tolerances.

Is machining or injection molding cheaper for plastic parts?

Below a few thousand parts, machining wins (no mold cost, days not weeks). Above ~5,000–10,000 parts of a stable design, molding’s lower unit price pays back the mold.

Plastic Machining at Tuowei Precision

Tuowei Precision machines POM, PEEK, PTFE, Nylon, PC, PMMA, UHMW and Ultem on 3- to 5-axis CNC centers, with stress-relief annealing and temperature-stabilized inspection reports. Pair plastic parts with metal components from our خدمات التصنيع الآلي باستخدام الحاسب الآلي الرقمي, or move to volume with contract machining. For tiny polymer components, see micro machined parts. Upload your STEP file for a quote in 24 hours.

صورة لأحد أعضاء فريق «تووي بريسيشن» يرتدي قميص بولو أزرق أمام آلات CNC غير واضحة المعالم في المصنع
نبذة عن المؤلف
آندي

مهندس تصنيع في شركة tuoweiprecision

بقلم آندي، مهندس تصنيع في شركة TUOWEI Precision. يتخصص آندي في التصنيع باستخدام الحاسب الآلي (CNC) والتصنيع الدقيق وهندسة الإنتاج، ويتمتع بخبرة عملية في دعم المشاريع بدءًا من النماذج الأولية السريعة وصولًا إلى الإنتاج على نطاق واسع. وهو يعمل عن كثب مع فرق الهندسة والتصنيع لتقييم المواد والتفاوتات المسموح بها وعمليات التصنيع وقابلية التصميم للتصنيع. تقدم مقالاته رؤى عملية ومستندة إلى المعرفة التقنية لمساعدة المهندسين والمشترين على اتخاذ قرارات تصنيع أفضل، وتحسين كفاءة الإنتاج، وتحقيق جودة متسقة للأجزاء. اكتشف حلول التصنيع باستخدام الحاسب الآلي (CNC) والتصنيع المخصص التي تقدمها TUOWEI Precision لمشروعك القادم.

لنبني المستقبل معًا

تعاون مع شركة «تووي بريسيجن» لتحويل رؤيتك إلى واقع

بدءًا من النماذج الأولية السريعة وصولاً إلى الإنتاج القابل للتوسع، تقدم شركة Tuowei Precision خدمات تصنيع موثوقة باستخدام الحاسب الآلي (CNC) تتسم بالدقة والاتساق في كل خطوة. ابدأ مشروعك اليوم.

تواصل معنا!
نضمن الرد السريع في غضون 24 ساعة
🔐 جميع التحميلات آمنة وسرية

استكشف الرؤى والابتكار

اقرأ أحدث أدلةنا حول التصنيع باستخدام الحاسب الآلي (CNC) والمواد والتشطيب واتجاهات الصناعة لاتخاذ قرارات إنتاجية أفضل.

تواصل معنا!
نضمن الرد السريع في غضون 24 ساعة
🔐 جميع التحميلات آمنة وسرية