ホーム " ブログ " Technical Guides " Plastic Machining Services: Materials, Tolerances, and How to Choose the Right Polymer

Plastic Machining Services: Materials, Tolerances, and How to Choose the Right Polymer

目次

卓偉精密

専門的な機械加工ソリューションをお探しですか?Tuowei Precisionのチームが、お客様のあらゆる製造ニーズにお応えします。現在進行中または今後予定されているプロジェクトのお見積もりについては、ぜひ今すぐお問い合わせください!

Plastic machining services - CNC milling a white POM Delrin engineering plastic part

Plastic machining services produce precision polymer parts by CNC milling, turning and drilling — no mold required. For prototypes, low-to-mid volumes, and high-performance materials like PEEK that are costly to mold, machining is usually the fastest and most economical route. But plastics behave nothing like metals on a machine: they expand with heat, spring away from the tool, and warp when internal stresses are released. This page covers the materials we machine, the tolerances that are realistic for each, how deformation is controlled, and when machining beats molding.

Plastic Machining Capabilities

Parameter 能力
プロセス 3/4/5-axis CNC milling, turning, drilling & tapping
部品サイズ Up to 1,500 × 1,000 × 500 mm plates; Ø600 mm turned
標準公差 ±0.05 mm (POM, PEEK)
厳しい公差 ±0.02 mm with annealing and stabilized measurement
表面仕上げ Ra 0.8–1.6 µm machined; polished optical finish on PMMA/PC
Quantities 1 to ~5,000 parts (beyond that, consider injection molding)

Material Selection Table

素材 強み 注意点 代表的な部品
POM / Acetal (Delrin) Most machinable; stiff, stable, low friction Hard to glue Gears, bushings, jigs — see POM/Delrin CNC machining
PEEK 250 °C continuous use, chemical resistance, strength Expensive; glass-filled grades abrasive Semiconductor, medical, aerospace
PTFE(テフロン) Lowest friction, inert, 260 °C Soft, creeps under load — loose tolerances Seals, valve seats, insulators
Nylon (PA6/PA66) Tough, wear-resistant, economical Absorbs moisture — dimensions drift ±0.2% Rollers, wear pads, sprockets
ポリカーボネート(PC) Transparent, impact-resistant Stress-cracks with aggressive coolants Guards, sight windows
PMMA(アクリル) Optical clarity, polishes beautifully Brittle — sharp tools, gentle clamping Light guides, displays, manifolds
UHMW-PE Best abrasion resistance, cheap Flexible — hard to hold flat tolerances Chute liners, wear strips
Ultem (PEI) Flame rated, 170 °C, strong Costly; notch-sensitive Aerospace interiors, sterilizable trays

Realistic Tolerances by Polymer

素材 スタンダード Achievable (annealed, 20 °C measured)
POM, PEEK ±0.05 mm ±0.02 mm
PC, PMMA, Ultem ±0.1 mm ±0.05 mm
Nylon (dried) ±0.1 mm ±0.05 mm
PTFE, UHMW ±0.1–0.2 mm ±0.05 mm small features

Specifying metal-like tolerances (±0.01 mm) on plastics drives cost and scrap without improving function — plastics expand ~5–10× more than steel per °C, so a POM part measured at 26 °C can read 0.03 mm larger per 100 mm than at 20 °C.

How We Control Deformation

  1. Stress-relief annealing before finishing cuts (POM ~150 °C, PEEK ~200 °C, slow ramps) releases extrusion stresses that would otherwise warp the part hours after machining.
  2. Symmetric material removal — removing stock evenly from both faces of plates keeps internal stresses balanced.
  3. Rough → rest → finish workflow for precision parts: ebauched parts stabilize 24 h before final dimensions are cut.
  4. Low-force fixturing — vacuum tables and wide-jaw clamping prevent elastic distortion that springs back after release.
  5. Sharp, polished tooling with high rake angles shears the plastic instead of melting it; air blast evacuates chips before they re-weld.
  6. Temperature-stabilized inspection — parts measured at 20 °C after resting, documented in the inspection report.

Machining vs Injection Molding: Break-Even

ファクター CNC加工 射出成形
金型費 なし Mold: $3,000–$50,000+
Lead time (first parts) 3–7 days 4–8 weeks
Unit cost at 100 pcs 低い Very high (mold amortized)
Unit cost at 50,000 pcs 高い 極めて低い
Material options Any extruded stock incl. PEEK, PTFE Injectable grades only
Typical break-even ~2,000–10,000 parts depending on size and mold complexity

Many programs start machined, then shift to molding at volume — often keeping machining for post-mold critical features.

よくある質問

What plastics are best for CNC machining?

POM (Delrin) is the gold standard: rigid, stable and fast-cutting with excellent tolerances. PEEK machines well for high-temperature service; PTFE and UHMW machine easily but hold looser tolerances due to softness.

What tolerance can plastic machining hold?

±0.05 mm is standard on stable polymers like POM and PEEK; ±0.02 mm is achievable with annealing and controlled measurement. Soft materials like PTFE are realistic at ±0.1 mm.

Why did my machined nylon part change size?

Nylon absorbs up to 2–3% moisture, growing roughly 0.2% in dimension. Precision nylon parts should be machined from dried stock and specified with moisture-conditioned tolerances.

Is machining or injection molding cheaper for plastic parts?

Below a few thousand parts, machining wins (no mold cost, days not weeks). Above ~5,000–10,000 parts of a stable design, molding’s lower unit price pays back the mold.

Plastic Machining at Tuowei Precision

Tuowei Precision machines POM, PEEK, PTFE, Nylon, PC, PMMA, UHMW and Ultem on 3- to 5-axis CNC centers, with stress-relief annealing and temperature-stabilized inspection reports. Pair plastic parts with metal components from our CNC加工サービス, or move to volume with contract machining. For tiny polymer components, see micro machined parts. Upload your STEP file for a quote in 24 hours.

工場内のぼやけたCNC工作機械を背景に、青いポロシャツを着たトゥオウェイ・プレシジョン社のチームメンバーの肖像
著者について
アンディ

tuoweiprecision社の製造エンジニア

執筆:TUOWEI Precisionの製造エンジニア、アンディ。. アンディは、CNC加工、精密製造、生産工学を専門としており、ラピッドプロトタイピングから本格生産に至るまでのプロジェクト支援において、実務経験を有しています。彼は、エンジニアリングチームや製造チームと緊密に連携し、材料、公差、加工プロセス、および設計の製造適性を評価しています。 彼の記事は、実用的かつ技術的な知見に裏打ちされた洞察を提供し、エンジニアや購買担当者がより適切な製造上の意思決定を行い、生産効率を最適化し、一貫した部品品質を実現できるよう支援しています。次回のプロジェクトには、TUOWEI PrecisionのCNC加工およびカスタム製造ソリューションをご検討ください。.

さあ、次の時代を共に築きましょう

Tuowei Precisionと提携し、お客様のビジョンを形にしましょう

ラピッドプロトタイピングから量産に至るまで、Tuowei Precisionは、あらゆる工程において精度と一貫性を兼ね備えた信頼性の高いCNC加工を提供します。今すぐプロジェクトを始めましょう。.

お問い合わせ
24時間以内の迅速な対応をお約束します
🔐 すべてのアップロードは安全かつ機密です。

インサイト&イノベーション

CNC加工、材料、仕上げ、業界の動向に関する最新のガイドをご覧いただき、より適切な生産判断を行ってください。

お問い合わせ
24時間以内の迅速な対応をお約束します
🔐 すべてのアップロードは安全かつ機密です。