ホーム " ブログ " Technical Guides " Swiss Screw Machining Services: How It Works, Tolerances, Materials & When to Use It

Swiss Screw Machining Services: How It Works, Tolerances, Materials & When to Use It

目次

卓偉精密

専門的な機械加工ソリューションをお探しですか?Tuowei Precisionのチームが、お客様のあらゆる製造ニーズにお応えします。現在進行中または今後予定されているプロジェクトのお見積もりについては、ぜひ今すぐお問い合わせください!

Swiss screw machining services - Swiss-type CNC lathe turning a small brass precision part

Swiss screw machining produces small, long and slender precision parts at high volume with tolerances conventional lathes struggle to hold. Originally developed for Swiss watchmaking, today’s CNC Swiss-type lathes make connector pins, medical components, shafts and fittings by the million. This guide explains how the sliding-headstock design actually works, what tolerances and sizes are realistic, which materials run best, when Swiss turning beats conventional turning — and when it doesn’t.

How a Swiss-Type Lathe Works

The defining feature of a Swiss-type (sliding headstock) lathe is the guide bushing. Bar stock is gripped by a collet in the headstock, which slides along the Z-axis and feeds the bar through a carbide-lined guide bushing. Cutting tools work on the material immediately next to the bushing — typically within 1–3 mm of support.

Because the workpiece is supported at the exact point of cutting, deflection is nearly eliminated. That is why a Swiss machine can turn a Ø2 mm shaft 40 mm long (L/D of 20:1) and still hold a few microns — geometry that would chatter or bend on a conventional lathe, where the tool may work far from the chuck.

Modern CNC Swiss machines add live tooling, sub-spindles and back-working stations, so a part is turned, milled, cross-drilled, threaded and cut off complete — no second operation.

Achievable Tolerances and Part Sizes

Parameter Typical Capability
Bar diameter range Ø0.5 – Ø38 mm (most Swiss machines)
Diameter tolerance ±0.005 mm standard; ±0.002 mm on controlled features
Length tolerance ±0.01 mm typical
Concentricity 0.005 mm (single setup, bushing-supported)
表面仕上げ Ra 0.4 – 0.8 µm turned; Ra 0.2 µm achievable
Length-to-diameter ratio Up to 20:1 without steady rest
Economic quantities ~500 to 1,000,000+ pieces

Swiss Machining vs Conventional CNC Turning

ファクター Swiss-type lathe Conventional CNC lathe
Best part size Ø0.5–38 mm, long/slender Ø10–600 mm, short/stocky
Slender parts (L/D > 3) Excellent — bushing support Needs tailstock/steady rest
Cycle time (small parts) Seconds — done-in-one Longer; often 2 operations
Setup cost Higher — justified by volume Lower — fine for small lots
Ideal quantities 大容量 1 – 5,000

For larger or lower-volume turned work, see our CNC turning service そして CNC turned parts ページ。.

Materials for Swiss Screw Machining

  • Free-machining brass (C360): the benchmark — fast, burr-free, excellent finish; see 真鍮のCNC加工
  • Stainless 303 / 304 / 316 / 17-4PH: medical, marine and fastener work
  • Aluminum 6061 / 2011: lightweight connectors and housings
  • Free-cutting steel 12L14, alloy 4140: shafts, pins, fittings
  • Titanium Grade 2/5: implants and aerospace pins — チタンのCNC加工
  • PEEK, POM and other plastics: insulators and wear parts — plastic machining services

Bar stock quality matters: Swiss machines feed ground or drawn bar through the guide bushing, so diameter consistency of the raw material directly affects the bushing fit and final tolerance.

Typical Swiss-Machined Parts

  • Electronic connector pins, sockets and ferrules
  • Medical bone screws, dental implant components, surgical instrument shafts
  • Fuel system and hydraulic fittings
  • Watch components, sensor housings, valve spools
  • Shafts and worms for micro motors

Cost Drivers: What Makes a Swiss Part Cheap or Expensive

  1. 数量: setup (programming, tool layout, bushing change) spreads across the run — unit prices fall steeply up to ~10,000 pcs.
  2. Material machinability: C360 brass runs 2–3× faster than 316 stainless or titanium.
  3. Tightest tolerance on the drawing: every feature at ±0.002 mm forces slower feeds and 100% gauging — tolerance only what the function needs.
  4. Cross features: live-tool milling and cross-drilling add cycle time; simple turned profiles are fastest.
  5. Bar diameter utilization: parts near standard bar sizes waste less material.

Limitations to Know

  • Diameter cap: above ~Ø38 mm, conventional turning takes over.
  • Low volumes: under a few hundred pieces, setup cost usually favors a conventional CNC lathe.
  • Remnant loss: each bar leaves an unusable remnant; very expensive materials need yield planning.

よくある質問

What is a Swiss screw machine?

A sliding-headstock lathe that feeds bar stock through a guide bushing, supporting the workpiece at the cutting point. It excels at small-diameter, long, high-precision parts in high volumes.

Why is it called Swiss machining?

The design was developed in late-1800s Switzerland to mass-produce watch components — tiny shafts and screws needing watchmaker precision at industrial quantities.

What tolerance can Swiss machining hold?

±0.005 mm is routine on diameters; ±0.002 mm is achievable on controlled features with good bar stock and temperature control.

Swiss machining vs screw machining — any difference?

“Screw machining” historically covers all automatic bar-fed lathes (including cam-driven multi-spindles); Swiss screw machining specifically means the sliding-headstock, guide-bushing type — today usually CNC.

Swiss Screw Machining at Tuowei Precision

Tuowei Precision runs CNC Swiss-type lathes with live tooling and sub-spindles for small precision parts from Ø0.5 to Ø38 mm — connector pins to implant screws — with 100% critical-dimension gauging. Combine Swiss parts with our CNC加工サービス or a full contract machining program. Send your drawing for a quote within 24 hours.

工場内のぼやけたCNC工作機械を背景に、青いポロシャツを着たトゥオウェイ・プレシジョン社のチームメンバーの肖像
著者について
アンディ

tuoweiprecision社の製造エンジニア

執筆:TUOWEI Precisionの製造エンジニア、アンディ。. アンディは、CNC加工、精密製造、生産工学を専門としており、ラピッドプロトタイピングから本格生産に至るまでのプロジェクト支援において、実務経験を有しています。彼は、エンジニアリングチームや製造チームと緊密に連携し、材料、公差、加工プロセス、および設計の製造適性を評価しています。 彼の記事は、実用的かつ技術的な知見に裏打ちされた洞察を提供し、エンジニアや購買担当者がより適切な製造上の意思決定を行い、生産効率を最適化し、一貫した部品品質を実現できるよう支援しています。次回のプロジェクトには、TUOWEI PrecisionのCNC加工およびカスタム製造ソリューションをご検討ください。.

さあ、次の時代を共に築きましょう

Tuowei Precisionと提携し、お客様のビジョンを形にしましょう

ラピッドプロトタイピングから量産に至るまで、Tuowei Precisionは、あらゆる工程において精度と一貫性を兼ね備えた信頼性の高いCNC加工を提供します。今すぐプロジェクトを始めましょう。.

お問い合わせ
24時間以内の迅速な対応をお約束します
🔐 すべてのアップロードは安全かつ機密です。

インサイト&イノベーション

CNC加工、材料、仕上げ、業界の動向に関する最新のガイドをご覧いただき、より適切な生産判断を行ってください。

お問い合わせ
24時間以内の迅速な対応をお約束します
🔐 すべてのアップロードは安全かつ機密です。