ホーム " ブログ " Technical Guides " CNC Turned Parts: Manufacturing Capabilities, Tolerances, Materials & Design Guide

CNC Turned Parts: Manufacturing Capabilities, Tolerances, Materials & Design Guide

目次

卓偉精密

専門的な機械加工ソリューションをお探しですか?Tuowei Precisionのチームが、お客様のあらゆる製造ニーズにお応えします。現在進行中または今後予定されているプロジェクトのお見積もりについては、ぜひ今すぐお問い合わせください!

CNC turned parts - precision aluminum stainless steel and brass shafts pins and fittings

CNC turned parts are components produced on computer-controlled lathes — shafts, pins, bushings, fittings, connectors and housings with rotational geometry. As a dedicated turned parts manufacturer, Tuowei Precision produces them from Ø0.5 mm Swiss-machined pins to Ø600 mm flanges, in one-off prototypes or 100,000-piece production runs. This page details the capabilities, achievable tolerances, material options, and the design decisions that make a turned part cheaper and better.

Turned Parts Manufacturing Capabilities

Parameter 能力
Diameter range Ø0.5 – Ø600 mm
Max turned length 1,200 mm between centers
Machines CNC lathes, turn-mill centers (live tooling, Y-axis, sub-spindle), Swiss-type lathes
Diameter tolerance ±0.01 mm standard; ±0.005 mm precision; ±0.002 mm ground
Concentricity / runout 0.01 mm standard; 0.005 mm same-setup features
表面仕上げ Ra 1.6 µm standard; Ra 0.4–0.8 µm fine turning; Ra 0.1 µm ground
スレッド Metric M1–M64, UNC/UNF, NPT/BSP, trapezoidal, custom
Quantities 1 – 100,000+ (Swiss lines for high volume)

Done-in-One: Turn-Mill Parts

Most “turned” parts aren’t purely round: they carry cross-holes, flats, keyways and milled pockets. Our turn-mill centers with live tooling and sub-spindles complete these features in the same setup as the turning — which is what actually protects your tolerances:

  • Position accuracy: cross-features located to the turned datum without re-fixturing error
  • Concentricity: front and back features finished without re-chucking (sub-spindle pickup)
  • Cost: one cycle replaces two machines, two setups and queue time between them

For the process fundamentals, see our guide to what CNC turning is そして、その CNC turning service ページ。.

Material Guide for Turned Parts

素材 加工性 こんな方に最適
真鍮 C360 Excellent (100% index) Fittings, valves, connectors — 真鍮のCNC加工
Aluminum 6061/2011 素晴らしい Lightweight housings, spacers
Free-cutting steel 12L14 とても良い High-volume shafts and pins
Alloy steel 4140 良好 Loaded shafts, heat-treatable
Stainless 303 良好 Corrosion-resistant hardware
Stainless 316 / 17-4PH 中程度 Marine, medical, high-strength
Titanium Gr2/Gr5 Challenging Aerospace, implants — チタンのCNC加工
銅 C110 Moderate (gummy) Electrical contacts — copper CNC machining
POM / PEEK / PTFE 素晴らしい Insulating bushings — plastic machining

Design Tips That Cut the Cost of Turned Parts

  1. Start from standard bar sizes: a Ø19.5 mm part from Ø20 bar machines fast; Ø21 mm forces the next bar size and wastes material.
  2. Avoid slender ratios: keep unsupported L/D under 3:1 for conventional turning — or expect Swiss machining (great) or steady rests (slower). Above 8:1, specify straightness realistically.
  3. Tolerance only what matters: every ±0.005 mm dimension adds gauging time; leave the rest at ISO 2768-f.
  4. Give thread relief and sharp-corner relief: undercuts at thread ends and shoulders let tools finish cleanly.
  5. Standard internal radii: corner radii ≥0.4 mm match standard insert noses; sharp internal corners need extra operations.
  6. Mind deep small holes: drilled depth beyond 8× diameter raises cost; beyond 12× needs gun drilling.

Quality Control for Turned Components

  • In-process gauging on first-offs and at set intervals (micrometers, air gauges for tight bores)
  • CMM inspection of critical dimensions with reports shipped per lot
  • Thread verification with GO/NO-GO gauges (6g/6H)
  • Runout and concentricity checks on V-blocks or between centers
  • Material mill certificates and full traceability per batch

よくある質問

What are CNC turned parts?

Components machined on CNC lathes where the workpiece rotates against a cutting tool — producing cylindrical geometry such as shafts, bushings, pins, fittings and threaded parts, often finished with milled cross-features on turn-mill machines.

What tolerance can turned parts hold?

±0.01 mm is routine on diameters; ±0.005 mm on precision features in a single setup; ±0.002 mm with cylindrical grinding after turning.

What is the difference between turned parts and milled parts?

Turned parts rotate against a fixed tool (round geometry — shafts, bushings); milled parts stay fixed while the tool rotates (prismatic geometry — plates, housings). Many components combine both on turn-mill centers.

What quantities do you manufacture?

From a single prototype on a CNC lathe to 100,000+ parts per year on Swiss-type machines — same drawing, scaled pricing at your quantity breaks.

Order Custom CNC Turned Parts From Tuowei Precision

Send your STEP file and drawing for a quote within 24 hours — covering material options, quantity breaks and lead time. For small-diameter high-volume work see Swiss screw machining services; for complete programs with milling, finishing and managed inventory, see contract machining services or our full CNC加工サービス.

工場内のぼやけたCNC工作機械を背景に、青いポロシャツを着たトゥオウェイ・プレシジョン社のチームメンバーの肖像
著者について
アンディ

tuoweiprecision社の製造エンジニア

執筆:TUOWEI Precisionの製造エンジニア、アンディ。. アンディは、CNC加工、精密製造、生産工学を専門としており、ラピッドプロトタイピングから本格生産に至るまでのプロジェクト支援において、実務経験を有しています。彼は、エンジニアリングチームや製造チームと緊密に連携し、材料、公差、加工プロセス、および設計の製造適性を評価しています。 彼の記事は、実用的かつ技術的な知見に裏打ちされた洞察を提供し、エンジニアや購買担当者がより適切な製造上の意思決定を行い、生産効率を最適化し、一貫した部品品質を実現できるよう支援しています。次回のプロジェクトには、TUOWEI PrecisionのCNC加工およびカスタム製造ソリューションをご検討ください。.

さあ、次の時代を共に築きましょう

Tuowei Precisionと提携し、お客様のビジョンを形にしましょう

ラピッドプロトタイピングから量産に至るまで、Tuowei Precisionは、あらゆる工程において精度と一貫性を兼ね備えた信頼性の高いCNC加工を提供します。今すぐプロジェクトを始めましょう。.

お問い合わせ
24時間以内の迅速な対応をお約束します
🔐 すべてのアップロードは安全かつ機密です。

インサイト&イノベーション

CNC加工、材料、仕上げ、業界の動向に関する最新のガイドをご覧いただき、より適切な生産判断を行ってください。

お問い合わせ
24時間以内の迅速な対応をお約束します
🔐 すべてのアップロードは安全かつ機密です。