Tuowei Precision fournit des solutions pour l'aérospatiale fabrication de tôles for brackets, enclosures, panels, chassis and ground support parts. We laser cut, form, weld, insert hardware and finish in one Shenzhen facility, so your parts move from flat pattern to inspected assembly without changing suppliers.

Sheet metal is everywhere on an aircraft that does not need a machined block: avionics trays, electrical boxes, brackets, access covers, ducting supports and ground equipment. Aerospace OEMs and tier suppliers across the aerospace sector rely on these metal components every day, and many aerospace applications depend on them. The parts look simple, but small errors stack fast. A flange that is 0.5 mm long throws off a hole pattern, and a bend that springs back two degrees stops an enclosure lid from closing.
Our engineers check each flat pattern, K factor and bend sequence before cutting, and the same team handles forming, welding and finishing. As an aerospace sheet metal fabricator working under an AS9100D and ISO 9001 quality system, we keep the material certification, first article data and inspection records with every lot.

Unlike many sheet metal fabrication companies that send work out, our integrated fabrication and assembly line keeps every step in one place, so each aerospace component moves through cutting, forming, joining and finishing under the same inspection plan. These fabrication capabilities combine advanced manufacturing equipment with proven precision metal fabrication methods.
Fiber lasers cut aluminum, stainless steel and copper cleanly, CO2 lasers handle plastics and gaskets, and Nd:YAG lasers take on thicker, harder alloys. Clean, low-distortion edges need little deburring before forming, which matters on thin aerospace-grade aluminum. For repeated hole patterns at volume, punching can be faster. Read more on our découpe au laser page.
CNC press brakes form flanges, channels and boxes using air bending, bottoming or coining, depending on how tightly the angle must be held, with springback compensation built into the CNC program. Our pliage de métaux capacity covers sheet and plate up to 60 mm thick with up to 1,000 tons of force, so the same shop handles thin enclosures and heavy ground support brackets.
TIG welding joins thin aluminum and stainless parts with low heat input to limit distortion, MIG suits thicker structural joints, and spot welding is used on overlapping sheet. We also press in self-clinching nuts, studs and standoffs, then assemble sub-components before inspection.
Anodizing and chromate conversion coating protect aluminum, passivation and electropolishing suit stainless parts, and powder coating covers ground equipment and enclosures. Finishing is applied after forming so the coating does not crack at the bends.
Choosing materials for aerospace parts starts with formability, weight and corrosion behavior, and each alloy behaves differently on the press brake. These alliages d'aluminium and steels are the grades most often specified for sheet metal used in aerospace work:
| Matériau | Pourquoi l'utilise-t-on ? | Forming note |
|---|---|---|
| Aluminum 5052-H32 | Good corrosion resistance, easy to bend | First choice for enclosures and covers |
| Aluminium 6061-T6 | Résistance accrue, soudable | Needs larger bend radii to avoid cracking |
| Aluminum 2024 and 7075 | Highest strength-to-weight ratio | Hard to form; often machined from plate instead |
| Stainless steel 304 and 316 | Heat and corrosion protection | Springs back more; we compensate in the program |
| Cold rolled and galvanized steel | Low cost for ground equipment | Painted or powder coated for protection |
If your drawing calls for 7075 in a formed shape, we will tell you at the quote stage whether it can be bent without cracking or should be machined instead.
These sheet metal aerospace components cover critical aerospace systems as well as the support hardware around them.
Large airframe skins made by stretch forming or hydroforming need specialized equipment and long-bed tooling. We focus on the brackets, enclosures, panels and assemblies that support those structures, where our cutting, bending and welding capacity is a strong fit for custom aerospace jobs.
Most extra cost in aircraft sheet metal comes from features that fight the fabrication process. A few rules keep parts cheaper and more accurate:
Our free DFM review flags these issues before the first part is cut, along with any feature that would be better as a machined detail.
Every aerospace order follows our AS9100D quality management system, which aligns our work with industry standards, aerospace quality management requirements and the quality standards on your purchase order. Depending on your requirements, we supply material certificates, first article inspection reports, dimensional reports on critical features and lot traceability. Special processes such as anodizing are documented with the finish specification on your drawing. This documentation is what lets precision and reliability be proven, not just promised. See our l'assurance qualité page pour plus de détails sur l'inspection.
Many sheet metal assemblies include machined or printed details, and aerospace manufacturers and aerospace companies often prefer one source for all of them. We can make those details in the same order:
Send your STEP file or flat pattern with material, thickness, finish and quantity. Our engineers will return a quote with DFM notes and a lead time, usually within hours, whether you need one prototype or a production batch.
Obtenir un devis immédiatIl s'agit de la découpe, du formage, du soudage et de la finition de tôles minces destinées à la fabrication de pièces pour avions et engins spatiaux, telles que des supports, des boîtiers, des panneaux et des châssis. Par rapport à la fabrication générale, ce procédé fait appel à des matériaux certifiés, à un contrôle plus rigoureux des processus et à des inspections documentées, ce qui permet de retracer l'origine de chaque pièce jusqu'à son lot de matériaux.
The most common are aluminum 5052-H32 and 6061-T6, stainless steel 304 and 316, and cold rolled steel for ground equipment. High-strength 2024 and 7075 are used where weight matters most, but they are hard to bend, so some features are better machined from plate.
General fabrication holds about ±0.25 mm. Laser cut features are accurate to about ±0.05 mm, bend angles to ±1°, and bend-to-edge dimensions to ±0.254 mm. Features that need tighter control, such as bearing bores, can be machined after forming.
Yes. Our quality system is AS9100D certified, and we supply material certificates, first article inspection reports, dimensional reports and lot traceability on request. Finish and special process records are included when your drawing calls for them.
Simple prototypes can ship in as little as 3 days. Parts with welding, hardware insertion or multi-step finishing take longer. We confirm the lead time in your quote after reviewing the drawing, material and finish requirements.