Inicio " Blogs " Technical Guides " Counterbore vs Countersink: Differences, Dimensions Chart and When to Use Each

Counterbore vs Countersink: Differences, Dimensions Chart and When to Use Each

Índice

Precisión Tuowei

¿Necesitas soluciones de mecanizado especializadas? El equipo de Tuowei Precision está a tu disposición para ayudarte con todas tus necesidades de fabricación. ¡Ponte en contacto con nosotros hoy mismo para solicitar un presupuesto para tus proyectos actuales o futuros!

Counterbore vs countersink - counterbored socket head cap screw beside countersunk flat head screw in aluminum plate

Counterbores and countersinks both let a fastener head sit flush with (or below) a surface — but they are different features for different screws, and mixing them up scraps parts. The short version: a counterbore is a flat-bottomed cylindrical recess for socket head cap screws; a countersink is a conical recess for flat head screws. This guide gives the dimension charts, drawing symbols, tooling and machining practice for both.

The Core Difference

Característica Counterbore ⌴ Countersink ⌵
Forma Cylindrical, flat bottom Conical (82°, 90°, 100°, 120°)
Fastener Socket head cap screw (SHCS), hex bolt + washer Flat head / countersunk screw
Bearing surface Flat shoulder under the head Cone matches the head taper
Head position Below surface, visible recess Flush with surface
Self-centering No — hole pattern tolerance is forgiving Yes — cone centers the screw (over-constrains multi-hole patterns)

Metric Counterbore Dimensions (Socket Head Cap Screws)

Standard clearance per ISO 273 medium fit, counterbore per common practice (EN/ISO 4762 heads):

Tornillo Clearance hole Ø Counterbore Ø Min. c’bore depth
M3 3.4 6.5 3.4
M4 4.5 8.0 4.6
M5 5.5 9.5 5.7
M6 6.6 11.0 6.8
M8 9.0 14.0 9.0
M10 11.0 17.5 11.2
M12 13.5 19.5 13.7

Depth note: minimum depth hides the head (head height + ~0.2–0.4 mm). Dimension depth to the flat bottom, and add washer thickness if used.

Metric Countersink Dimensions (Flat Head Screws, 90°)

Tornillo Clearance hole Ø Countersink Ø (top of cone)
M3 3.4 6.3–6.5
M4 4.5 8.4–8.6
M5 5.5 9.7–10.0
M6 6.6 12.0–12.4
M8 9.0 16.0–16.4
M10 11.0 20.0–20.4

Angle trap: metric flat heads (ISO) are 90°; inch flat heads (ANSI) are 82°. Cutting an 82° seat for a 90° screw leaves the head proud and bearing on its rim — always match the standard of the fastener.

Drawing Symbols and Callouts

  • Counterbore: ⌴ — e.g. Ø6.6 THRU ⌴ Ø11.0 ↧6.8 (thru hole, counterbore diameter, depth symbol)
  • Countersink: ⌵ — e.g. Ø6.6 THRU ⌵ Ø12.4 × 90° (dimension the top diameter and included angle)
  • Spotface: SF or ⌴ with “SF” — a shallow counterbore (0.2–0.5 mm) that only cleans the surface so a head or washer seats flat on castings/raw stock

When to Choose Which

Situation Elija Por qué
Maximum clamping, serviceable joint Counterbore + SHCS Strong heads, forgiving positions, wrench access
Flush aerodynamic/cosmetic surface Countersink + flat head Nothing protrudes
Multi-hole precision pattern Counterbore Countersinks self-center and fight positional error — pattern can bind
Thin sheet metal Neither — use dimpling or weld nuts Cone would break through; see sheet metal practice
Soft materials (plastics, aluminum) Counterbore preferred Flat seat spreads load; cones creep in plastics — see plastic machining services

Tooling and Machining Practice

  • Counterbores: on CNC mills, a flat end mill helically interpolated makes any diameter — piloted counterbore tools suit drill presses. Flatness of the seat matters: finish with a light bottom pass.
  • Countersinks: single-flute or three-flute countersink cutters chatter least; chamfer mills on CNC give the cleanest cones. Control depth by diameter-at-top, not Z-depth from an uncertain surface.
  • Deburring bonus: a 90° countersink at 0.2–0.3 mm depth is also the standard hole-edge break — see our deburring guide.

Preguntas frecuentes

What is the difference between counterbore and countersink?

A counterbore is a flat-bottomed cylindrical recess that houses a socket head cap screw; a countersink is a cone-shaped recess that lets a flat head screw sit flush. Different screws, different geometry, different symbols (⌴ vs ⌵).

What is a counterbore used for?

Recessing socket head cap screws (or bolt heads with washers) below the surface — protecting the head, cleaning up the look, and providing a flat, strong bearing seat.

What angle is a countersink?

Match the fastener: 90° for metric/ISO flat heads, 82° for inch/ANSI flat heads, 100° for many aerospace rivets and screws, 120° for sheet-metal applications.

What is a spotface?

A very shallow counterbore that simply flattens a rough or angled surface so a fastener head or washer can seat squarely — common on castings and extrusions.

Precision Holes by Tuowei Precision

Counterbores, countersinks and spotfaces are standard features in our Servicios de mecanizado CNC — interpolated to size, depth-controlled, burr-free. For complete fastener-ready assemblies, see contract machining services. Upload your drawing for a 24-hour quote.

Retrato de un miembro del equipo de Tuowei Precision con un polo azul delante de unas máquinas CNC borrosas en la fábrica
Acerca del autor
Andy

Ingeniero de fabricación en tuoweiprecision

Escrito por Andy, ingeniero de fabricación en TUOWEI Precision. Andy está especializado en mecanizado CNC, fabricación de precisión e ingeniería de producción, y cuenta con experiencia práctica en el apoyo a proyectos que abarcan desde la creación rápida de prototipos hasta la producción a gran escala. Trabaja en estrecha colaboración con los equipos de ingeniería y fabricación para evaluar materiales, tolerancias, procesos de mecanizado y la facilidad de fabricación de los diseños. Sus artículos ofrecen información práctica y con base técnica para ayudar a ingenieros y compradores a tomar mejores decisiones de fabricación, optimizar la eficiencia de la producción y lograr una calidad constante de las piezas. Descubre las soluciones de mecanizado CNC y fabricación a medida de TUOWEI Precision para tu próximo proyecto.

Construyamos juntos el futuro

Colabora con Tuowei Precision para hacer realidad tu visión

Desde prototipos rápidos hasta la producción a gran escala, Tuowei Precision ofrece un mecanizado CNC fiable, con precisión y uniformidad en cada paso. Empieza tu proyecto hoy mismo.

Póngase en contacto con nosotros
Respuesta rápida garantizada en un plazo de 24 horas
🔐 Todas las cargas son seguras y confidenciales

Descubre ideas e innovación

Lee nuestras últimas guías sobre mecanizado CNC, materiales, acabados y tendencias del sector para tomar mejores decisiones de producción.

Póngase en contacto con nosotros
Respuesta rápida garantizada en un plazo de 24 horas
🔐 Todas las cargas son seguras y confidenciales