جدول المحتويات

دقة تووي

هل تحتاج إلى حلول متخصصة في مجال التصنيع الآلي؟ فريقنا في Tuowei Precision جاهز لمساعدتك في تلبية جميع احتياجاتك التصنيعية. تواصل معنا اليوم للحصول على عرض أسعار لمشاريعك الجارية أو المرتقبة!

Counterbore vs countersink - counterbored socket head cap screw beside countersunk flat head screw in aluminum plate

Counterbores and countersinks both let a fastener head sit flush with (or below) a surface — but they are different features for different screws, and mixing them up scraps parts. The short version: a counterbore is a flat-bottomed cylindrical recess for socket head cap screws; a countersink is a conical recess for flat head screws. This guide gives the dimension charts, drawing symbols, tooling and machining practice for both.

The Core Difference

الميزة Counterbore ⌴ Countersink ⌵
الشكل Cylindrical, flat bottom Conical (82°, 90°, 100°, 120°)
Fastener Socket head cap screw (SHCS), hex bolt + washer Flat head / countersunk screw
Bearing surface Flat shoulder under the head Cone matches the head taper
Head position Below surface, visible recess Flush with surface
Self-centering No — hole pattern tolerance is forgiving Yes — cone centers the screw (over-constrains multi-hole patterns)

Metric Counterbore Dimensions (Socket Head Cap Screws)

Standard clearance per ISO 273 medium fit, counterbore per common practice (EN/ISO 4762 heads):

برغي Clearance hole Ø Counterbore Ø Min. c’bore depth
M3 3.4 6.5 3.4
M4 4.5 8.0 4.6
M5 5.5 9.5 5.7
M6 6.6 11.0 6.8
M8 9.0 14.0 9.0
M10 11.0 17.5 11.2
M12 13.5 19.5 13.7

Depth note: minimum depth hides the head (head height + ~0.2–0.4 mm). Dimension depth to the flat bottom, and add washer thickness if used.

Metric Countersink Dimensions (Flat Head Screws, 90°)

برغي Clearance hole Ø Countersink Ø (top of cone)
M3 3.4 6.3–6.5
M4 4.5 8.4–8.6
M5 5.5 9.7–10.0
M6 6.6 12.0–12.4
M8 9.0 16.0–16.4
M10 11.0 20.0–20.4

Angle trap: metric flat heads (ISO) are 90°; inch flat heads (ANSI) are 82°. Cutting an 82° seat for a 90° screw leaves the head proud and bearing on its rim — always match the standard of the fastener.

Drawing Symbols and Callouts

  • Counterbore: ⌴ — e.g. Ø6.6 THRU ⌴ Ø11.0 ↧6.8 (thru hole, counterbore diameter, depth symbol)
  • Countersink: ⌵ — e.g. Ø6.6 THRU ⌵ Ø12.4 × 90° (dimension the top diameter and included angle)
  • Spotface: SF or ⌴ with “SF” — a shallow counterbore (0.2–0.5 mm) that only cleans the surface so a head or washer seats flat on castings/raw stock

When to Choose Which

Situation اختر لماذا
Maximum clamping, serviceable joint Counterbore + SHCS Strong heads, forgiving positions, wrench access
Flush aerodynamic/cosmetic surface Countersink + flat head Nothing protrudes
Multi-hole precision pattern Counterbore Countersinks self-center and fight positional error — pattern can bind
Thin sheet metal Neither — use dimpling or weld nuts Cone would break through; see sheet metal practice
Soft materials (plastics, aluminum) Counterbore preferred Flat seat spreads load; cones creep in plastics — see plastic machining services

Tooling and Machining Practice

  • Counterbores: on CNC mills, a flat end mill helically interpolated makes any diameter — piloted counterbore tools suit drill presses. Flatness of the seat matters: finish with a light bottom pass.
  • Countersinks: single-flute or three-flute countersink cutters chatter least; chamfer mills on CNC give the cleanest cones. Control depth by diameter-at-top, not Z-depth from an uncertain surface.
  • Deburring bonus: a 90° countersink at 0.2–0.3 mm depth is also the standard hole-edge break — see our deburring guide.

الأسئلة الشائعة

What is the difference between counterbore and countersink?

A counterbore is a flat-bottomed cylindrical recess that houses a socket head cap screw; a countersink is a cone-shaped recess that lets a flat head screw sit flush. Different screws, different geometry, different symbols (⌴ vs ⌵).

What is a counterbore used for?

Recessing socket head cap screws (or bolt heads with washers) below the surface — protecting the head, cleaning up the look, and providing a flat, strong bearing seat.

What angle is a countersink?

Match the fastener: 90° for metric/ISO flat heads, 82° for inch/ANSI flat heads, 100° for many aerospace rivets and screws, 120° for sheet-metal applications.

What is a spotface?

A very shallow counterbore that simply flattens a rough or angled surface so a fastener head or washer can seat squarely — common on castings and extrusions.

Precision Holes by Tuowei Precision

Counterbores, countersinks and spotfaces are standard features in our خدمات التصنيع الآلي باستخدام الحاسب الآلي الرقمي — interpolated to size, depth-controlled, burr-free. For complete fastener-ready assemblies, see contract machining services. Upload your drawing for a 24-hour quote.

صورة لأحد أعضاء فريق «تووي بريسيشن» يرتدي قميص بولو أزرق أمام آلات CNC غير واضحة المعالم في المصنع
نبذة عن المؤلف
آندي

مهندس تصنيع في شركة tuoweiprecision

بقلم آندي، مهندس تصنيع في شركة TUOWEI Precision. يتخصص آندي في التصنيع باستخدام الحاسب الآلي (CNC) والتصنيع الدقيق وهندسة الإنتاج، ويتمتع بخبرة عملية في دعم المشاريع بدءًا من النماذج الأولية السريعة وصولًا إلى الإنتاج على نطاق واسع. وهو يعمل عن كثب مع فرق الهندسة والتصنيع لتقييم المواد والتفاوتات المسموح بها وعمليات التصنيع وقابلية التصميم للتصنيع. تقدم مقالاته رؤى عملية ومستندة إلى المعرفة التقنية لمساعدة المهندسين والمشترين على اتخاذ قرارات تصنيع أفضل، وتحسين كفاءة الإنتاج، وتحقيق جودة متسقة للأجزاء. اكتشف حلول التصنيع باستخدام الحاسب الآلي (CNC) والتصنيع المخصص التي تقدمها TUOWEI Precision لمشروعك القادم.

لنبني المستقبل معًا

تعاون مع شركة «تووي بريسيجن» لتحويل رؤيتك إلى واقع

بدءًا من النماذج الأولية السريعة وصولاً إلى الإنتاج القابل للتوسع، تقدم شركة Tuowei Precision خدمات تصنيع موثوقة باستخدام الحاسب الآلي (CNC) تتسم بالدقة والاتساق في كل خطوة. ابدأ مشروعك اليوم.

تواصل معنا!
نضمن الرد السريع في غضون 24 ساعة
🔐 جميع التحميلات آمنة وسرية

استكشف الرؤى والابتكار

اقرأ أحدث أدلةنا حول التصنيع باستخدام الحاسب الآلي (CNC) والمواد والتشطيب واتجاهات الصناعة لاتخاذ قرارات إنتاجية أفضل.

تواصل معنا!
نضمن الرد السريع في غضون 24 ساعة
🔐 جميع التحميلات آمنة وسرية