Inicio " Blogs " Technical Guides " CNC Turned Parts: Manufacturing Capabilities, Tolerances, Materials & Design Guide

CNC Turned Parts: Manufacturing Capabilities, Tolerances, Materials & Design Guide

Índice

Precisión Tuowei

¿Necesitas soluciones de mecanizado especializadas? El equipo de Tuowei Precision está a tu disposición para ayudarte con todas tus necesidades de fabricación. ¡Ponte en contacto con nosotros hoy mismo para solicitar un presupuesto para tus proyectos actuales o futuros!

CNC turned parts - precision aluminum stainless steel and brass shafts pins and fittings

CNC turned parts are components produced on computer-controlled lathes — shafts, pins, bushings, fittings, connectors and housings with rotational geometry. As a dedicated turned parts manufacturer, Tuowei Precision produces them from Ø0.5 mm Swiss-machined pins to Ø600 mm flanges, in one-off prototypes or 100,000-piece production runs. This page details the capabilities, achievable tolerances, material options, and the design decisions that make a turned part cheaper and better.

Turned Parts Manufacturing Capabilities

Parameter Capacidad
Diameter range Ø0.5 – Ø600 mm
Max turned length 1,200 mm between centers
Machines CNC lathes, turn-mill centers (live tooling, Y-axis, sub-spindle), Swiss-type lathes
Diameter tolerance ±0.01 mm standard; ±0.005 mm precision; ±0.002 mm ground
Concentricity / runout 0.01 mm standard; 0.005 mm same-setup features
Acabado de la superficie Ra 1.6 µm standard; Ra 0.4–0.8 µm fine turning; Ra 0.1 µm ground
Hilos Metric M1–M64, UNC/UNF, NPT/BSP, trapezoidal, custom
Quantities 1 – 100,000+ (Swiss lines for high volume)

Done-in-One: Turn-Mill Parts

Most “turned” parts aren’t purely round: they carry cross-holes, flats, keyways and milled pockets. Our turn-mill centers with live tooling and sub-spindles complete these features in the same setup as the turning — which is what actually protects your tolerances:

  • Position accuracy: cross-features located to the turned datum without re-fixturing error
  • Concentricity: front and back features finished without re-chucking (sub-spindle pickup)
  • Cost: one cycle replaces two machines, two setups and queue time between them

For the process fundamentals, see our guide to what CNC turning is y el CNC turning service página.

Material Guide for Turned Parts

Material Mecanizabilidad Ideal para
Latón C360 Excellent (100% index) Fittings, valves, connectors — mecanizado CNC de latón
Aluminum 6061/2011 Excelente Lightweight housings, spacers
Free-cutting steel 12L14 Muy bien High-volume shafts and pins
Alloy steel 4140 Bien Loaded shafts, heat-treatable
Stainless 303 Bien Corrosion-resistant hardware
Stainless 316 / 17-4PH Moderado Marine, medical, high-strength
Titanium Gr2/Gr5 Challenging Aerospace, implants — mecanizado CNC de titanio
Cobre C110 Moderate (gummy) Electrical contacts — copper CNC machining
POM / PEEK / PTFE Excelente Insulating bushings — plastic machining

Design Tips That Cut the Cost of Turned Parts

  1. Start from standard bar sizes: a Ø19.5 mm part from Ø20 bar machines fast; Ø21 mm forces the next bar size and wastes material.
  2. Avoid slender ratios: keep unsupported L/D under 3:1 for conventional turning — or expect Swiss machining (great) or steady rests (slower). Above 8:1, specify straightness realistically.
  3. Tolerance only what matters: every ±0.005 mm dimension adds gauging time; leave the rest at ISO 2768-f.
  4. Give thread relief and sharp-corner relief: undercuts at thread ends and shoulders let tools finish cleanly.
  5. Standard internal radii: corner radii ≥0.4 mm match standard insert noses; sharp internal corners need extra operations.
  6. Mind deep small holes: drilled depth beyond 8× diameter raises cost; beyond 12× needs gun drilling.

Quality Control for Turned Components

  • In-process gauging on first-offs and at set intervals (micrometers, air gauges for tight bores)
  • CMM inspection of critical dimensions with reports shipped per lot
  • Thread verification with GO/NO-GO gauges (6g/6H)
  • Runout and concentricity checks on V-blocks or between centers
  • Material mill certificates and full traceability per batch

Preguntas frecuentes

What are CNC turned parts?

Components machined on CNC lathes where the workpiece rotates against a cutting tool — producing cylindrical geometry such as shafts, bushings, pins, fittings and threaded parts, often finished with milled cross-features on turn-mill machines.

What tolerance can turned parts hold?

±0.01 mm is routine on diameters; ±0.005 mm on precision features in a single setup; ±0.002 mm with cylindrical grinding after turning.

What is the difference between turned parts and milled parts?

Turned parts rotate against a fixed tool (round geometry — shafts, bushings); milled parts stay fixed while the tool rotates (prismatic geometry — plates, housings). Many components combine both on turn-mill centers.

What quantities do you manufacture?

From a single prototype on a CNC lathe to 100,000+ parts per year on Swiss-type machines — same drawing, scaled pricing at your quantity breaks.

Order Custom CNC Turned Parts From Tuowei Precision

Send your STEP file and drawing for a quote within 24 hours — covering material options, quantity breaks and lead time. For small-diameter high-volume work see Swiss screw machining services; for complete programs with milling, finishing and managed inventory, see contract machining services or our full Servicios de mecanizado CNC.

Retrato de un miembro del equipo de Tuowei Precision con un polo azul delante de unas máquinas CNC borrosas en la fábrica
Acerca del autor
Andy

Ingeniero de fabricación en tuoweiprecision

Escrito por Andy, ingeniero de fabricación en TUOWEI Precision. Andy está especializado en mecanizado CNC, fabricación de precisión e ingeniería de producción, y cuenta con experiencia práctica en el apoyo a proyectos que abarcan desde la creación rápida de prototipos hasta la producción a gran escala. Trabaja en estrecha colaboración con los equipos de ingeniería y fabricación para evaluar materiales, tolerancias, procesos de mecanizado y la facilidad de fabricación de los diseños. Sus artículos ofrecen información práctica y con base técnica para ayudar a ingenieros y compradores a tomar mejores decisiones de fabricación, optimizar la eficiencia de la producción y lograr una calidad constante de las piezas. Descubre las soluciones de mecanizado CNC y fabricación a medida de TUOWEI Precision para tu próximo proyecto.

Construyamos juntos el futuro

Colabora con Tuowei Precision para hacer realidad tu visión

Desde prototipos rápidos hasta la producción a gran escala, Tuowei Precision ofrece un mecanizado CNC fiable, con precisión y uniformidad en cada paso. Empieza tu proyecto hoy mismo.

Póngase en contacto con nosotros
Respuesta rápida garantizada en un plazo de 24 horas
🔐 Todas las cargas son seguras y confidenciales

Descubre ideas e innovación

Lee nuestras últimas guías sobre mecanizado CNC, materiales, acabados y tendencias del sector para tomar mejores decisiones de producción.

Póngase en contacto con nosotros
Respuesta rápida garantizada en un plazo de 24 horas
🔐 Todas las cargas son seguras y confidenciales