Accueil » Blogs » Technical Guides » CNC Turned Parts: Manufacturing Capabilities, Tolerances, Materials & Design Guide

CNC Turned Parts: Manufacturing Capabilities, Tolerances, Materials & Design Guide

Table des matières

Précision Tuowei

Vous avez besoin de solutions d'usinage spécialisées ? L'équipe de Tuowei Precision est là pour répondre à tous vos besoins en matière de fabrication. Contactez-nous dès aujourd'hui pour obtenir un devis concernant vos projets en cours ou à venir !

CNC turned parts - precision aluminum stainless steel and brass shafts pins and fittings

CNC turned parts are components produced on computer-controlled lathes — shafts, pins, bushings, fittings, connectors and housings with rotational geometry. As a dedicated turned parts manufacturer, Tuowei Precision produces them from Ø0.5 mm Swiss-machined pins to Ø600 mm flanges, in one-off prototypes or 100,000-piece production runs. This page details the capabilities, achievable tolerances, material options, and the design decisions that make a turned part cheaper and better.

Turned Parts Manufacturing Capabilities

Parameter Capacité
Diameter range Ø0.5 – Ø600 mm
Max turned length 1,200 mm between centers
Machines CNC lathes, turn-mill centers (live tooling, Y-axis, sub-spindle), Swiss-type lathes
Diameter tolerance ±0.01 mm standard; ±0.005 mm precision; ±0.002 mm ground
Concentricity / runout 0.01 mm standard; 0.005 mm same-setup features
Finition de surface Ra 1.6 µm standard; Ra 0.4–0.8 µm fine turning; Ra 0.1 µm ground
Fils de discussion Metric M1–M64, UNC/UNF, NPT/BSP, trapezoidal, custom
Quantities 1 – 100,000+ (Swiss lines for high volume)

Done-in-One: Turn-Mill Parts

Most “turned” parts aren’t purely round: they carry cross-holes, flats, keyways and milled pockets. Our turn-mill centers with live tooling and sub-spindles complete these features in the same setup as the turning — which is what actually protects your tolerances:

  • Position accuracy: cross-features located to the turned datum without re-fixturing error
  • Concentricity: front and back features finished without re-chucking (sub-spindle pickup)
  • Cost: one cycle replaces two machines, two setups and queue time between them

For the process fundamentals, see our guide to what CNC turning is et le CNC turning service page.

Material Guide for Turned Parts

Matériau Usinabilité Idéal pour
Laiton C360 Excellent (100% index) Fittings, valves, connectors — usinage CNC du laiton
Aluminum 6061/2011 Excellent Lightweight housings, spacers
Free-cutting steel 12L14 Très bien High-volume shafts and pins
Alloy steel 4140 Bon Loaded shafts, heat-treatable
Stainless 303 Bon Corrosion-resistant hardware
Stainless 316 / 17-4PH Modéré Marine, medical, high-strength
Titanium Gr2/Gr5 Challenging Aerospace, implants — Usinage CNC du titane
Cuivre C110 Moderate (gummy) Electrical contacts — copper CNC machining
POM / PEEK / PTFE Excellent Insulating bushings — plastic machining

Design Tips That Cut the Cost of Turned Parts

  1. Start from standard bar sizes: a Ø19.5 mm part from Ø20 bar machines fast; Ø21 mm forces the next bar size and wastes material.
  2. Avoid slender ratios: keep unsupported L/D under 3:1 for conventional turning — or expect Swiss machining (great) or steady rests (slower). Above 8:1, specify straightness realistically.
  3. Tolerance only what matters: every ±0.005 mm dimension adds gauging time; leave the rest at ISO 2768-f.
  4. Give thread relief and sharp-corner relief: undercuts at thread ends and shoulders let tools finish cleanly.
  5. Standard internal radii: corner radii ≥0.4 mm match standard insert noses; sharp internal corners need extra operations.
  6. Mind deep small holes: drilled depth beyond 8× diameter raises cost; beyond 12× needs gun drilling.

Quality Control for Turned Components

  • In-process gauging on first-offs and at set intervals (micrometers, air gauges for tight bores)
  • CMM inspection of critical dimensions with reports shipped per lot
  • Thread verification with GO/NO-GO gauges (6g/6H)
  • Runout and concentricity checks on V-blocks or between centers
  • Material mill certificates and full traceability per batch

Questions fréquemment posées

What are CNC turned parts?

Components machined on CNC lathes where the workpiece rotates against a cutting tool — producing cylindrical geometry such as shafts, bushings, pins, fittings and threaded parts, often finished with milled cross-features on turn-mill machines.

What tolerance can turned parts hold?

±0.01 mm is routine on diameters; ±0.005 mm on precision features in a single setup; ±0.002 mm with cylindrical grinding after turning.

What is the difference between turned parts and milled parts?

Turned parts rotate against a fixed tool (round geometry — shafts, bushings); milled parts stay fixed while the tool rotates (prismatic geometry — plates, housings). Many components combine both on turn-mill centers.

What quantities do you manufacture?

From a single prototype on a CNC lathe to 100,000+ parts per year on Swiss-type machines — same drawing, scaled pricing at your quantity breaks.

Order Custom CNC Turned Parts From Tuowei Precision

Send your STEP file and drawing for a quote within 24 hours — covering material options, quantity breaks and lead time. For small-diameter high-volume work see Swiss screw machining services; for complete programs with milling, finishing and managed inventory, see contract machining services or our full Services d'usinage CNC.

Portrait d'un membre de l'équipe de Tuowei Precision, vêtu d'un polo bleu, devant des machines CNC floues dans l'usine
À propos de l'auteur
Andy

Ingénieur de production chez tuoweiprecision

Rédigé par Andy, ingénieur de production chez TUOWEI Precision. Andy est spécialisé dans l'usinage CNC, la fabrication de précision et l'ingénierie de production. Il possède une expérience pratique dans l'accompagnement de projets, du prototypage rapide à la production à grande échelle. Il travaille en étroite collaboration avec les équipes d'ingénierie et de fabrication pour évaluer les matériaux, les tolérances, les procédés d'usinage et la fabricabilité des conceptions. Ses articles offrent des conseils pratiques et techniquement fondés pour aider les ingénieurs et les acheteurs à prendre de meilleures décisions en matière de fabrication, à optimiser l’efficacité de la production et à garantir une qualité constante des pièces. Découvrez les solutions d’usinage CNC et de fabrication sur mesure de TUOWEI Precision pour votre prochain projet.

Construisons ensemble l'avenir

Collaborez avec Tuowei Precision pour donner vie à votre vision

Du prototypage rapide à la production à grande échelle, Tuowei Precision propose des services d'usinage CNC fiables, alliant précision et régularité à chaque étape. Lancez votre projet dès aujourd'hui.

Prenez contact avec nous !
Réponse rapide garantie dans les 24 heures
🔐 Tous les téléchargements sont sécurisés et confidentiels

Explorer les idées et l'innovation

Consultez nos derniers guides sur l'usinage CNC, les matériaux, les finitions et les tendances du secteur pour prendre de meilleures décisions en matière de production.

Prenez contact avec nous !
Réponse rapide garantie dans les 24 heures
🔐 Tous les téléchargements sont sécurisés et confidentiels