Aerospace · Injection Molding

Aerospace Plastic Injection Molding for Flight-Ready Components

Tuowei Precision is a precision 射出成形 partner for cabin trim, electrical housings, connector bodies, clips and UAV parts. We design and build each injection mold in-house, run it on machines from 90 to 830 tons, and inspect every lot, so your custom plastic components repeat from the first shot to the last.

すべてのアップロードは安全かつ機密です。
AS9100D
ISO 9001:2015
社内での CNC 仕上げ加工
すべての見積もりに対するDFMレビュー
Molded aerospace plastic parts in Ultem, PEEK and black engineering plastic
なぜ射出成形なのか

Why Aerospace Injection Molding Pays Off

Every gram matters on an aircraft, and replacing machined metal brackets, clips and housings with molded thermoplastic or composite-filled parts is one of the simplest ways to save weight and improve fuel efficiency. Once the tool is built, injection molding produces complex plastic components with ribs, snaps and bosses at low cost per part, which also cuts assembly time.

The catch is that the 射出成形金型 is a fixed investment. For fewer than a few hundred parts, 3D printing or vacuum casting is usually cheaper, and design changes after the tool is cut cost time and money. That is why we run a full manufacturability and mold flow review before any steel is machined, while design flexibility is still cheap.

  • Lightweight components that replace metal parts
  • Complex shapes molded in one piece
  • Consistent quality across thousands of parts
  • Low cost per part once the tool is paid off
材料

High-Performance Engineering Plastics for Aerospace Applications

Aerospace materials must meet performance requirements for heat, aviation fluids and mechanical strength, and inside the cabin they must pass flame, smoke and toxicity rules such as FAR 25.853 for performance and safety. These are the resins aerospace manufacturers ask about most:

素材使用される理由代表的な部品
PEEKStrength at high temperature, chemical resistanceBrackets, clips, bushings, metal replacements
PEI (Ultem)Inherent flame resistance, stiffnessCabin parts, electrical housings, ducts
PC and PC/ABSToughness and impact strengthCovers, bezels, panels
Nylon (PA66, glass-filled)Strength, wear resistanceClips, cable ties, gears
LSR siliconeFlexible, heat stableSeals and gaskets

Not every grade carries the flammability rating your program needs. Send the material specification with your drawings and we will confirm the grade, supplier certificate and moldability before quoting.

Polished steel multi-cavity injection mold tool
Mold Design and Tooling

Injection Mold Tooling and Engineering

Mold design comes first, because the injection mold decides part accuracy, surface finish and how long production can run. Our engineers review gating, venting, cooling and ejection, and run a free mold flow analysis to predict shrinkage, sink and warpage before tooling starts.

  • Aluminum injection mold tools for roughly 5,000 to 10,000 shots
  • Hardened steel injection mold tools for 100,000 to over 1,000,000 shots, suited to large quantities
  • Mold components machined to ±0.02 mm, with EDM for fine detail
  • Standard molded tolerance of ±0.1 mm, tighter on critical features

Learn more about our 射出成形金型 process.

プロセス

Injection Molding Services for Complex Geometries

インサート成形およびオーバーモールド

インサート成形 encapsulates threaded inserts, pins or contacts in one shot, which removes secondary assembly. オーバーモールディング adds a soft-touch or sealing layer over a rigid substrate.

ガスアシスト成形および肉厚部品

Gas-assist molding hollows out thick sections to prevent sink and warpage and to reduce weight.

マイクロ成形

Micro injection molding produces small connector and sensor parts with fine features and tight tolerances.

液体シリコーンゴムの成形

LSR molding makes seals, gaskets and grommets that stay flexible across a wide temperature range.

部品

Aerospace Parts and Plastic Molded Parts We Make

  • キャビンの内装、ベゼル、およびシート部品
  • 電気コネクタの本体およびハウジング
  • ケーブルクリップ、結束バンド、ハーネスサポート
  • 航空電子機器用筐体およびハウジングカバー
  • 通気口、ダクト継手、グリル
  • UAVの本体、プロペラガード、バッテリーカバー
  • シール、ガスケット、グロメット

These custom aerospace plastic parts are cost-effective components for aerospace manufacturing, where safety and performance both count.

品質

AS9100 Quality and Process Control for Aerospace Programs

Our quality management system is AS9100D and ISO 9001 certified, and every machine runs to documented settings. For aerospace and defense work we lock process settings after first article approval, record them for every lot, and supply material certificates, dimensional reports and lot traceability on request. Changes to resin, mold or process are only made with your approval.

プロトタイプから生産へ

プロトタイプから生産へ

Most programs start with printed or vacuum cast parts, move to an aluminum bridge tool for qualification parts, then switch to a steel production mold. Moving in that order keeps tooling spend low until the design is frozen, and our injection molding solutions cover each step.

お見積りをご依頼ください

Get an Injection Molding Quote

Send your 3D model, resin specification, annual volume and finish. Our engineers will return tooling and part pricing, a mold flow report and lead time. Molded samples can be ready in as few as 5 business days from an aluminum tool.

お見積もり
🔒 すべてのアップロードは安全かつ機密が守られています
お問い合わせ
24時間以内の迅速な対応をお約束します
🔐 すべてのアップロードは安全かつ機密です。
— よくある質問 —

よくある質問

航空宇宙
航空宇宙用射出成形とは何ですか?

It is the molding of high-performance thermoplastics into aerospace components such as cabin trim, connector bodies, clips and housings for aircraft, spacecraft and UAVs. Compared with general molding, it uses certified resins, locked process settings and documented inspection so every lot matches the approved first article.

Which plastics are used in aircraft molding?

Common choices are PEEK for heat and chemical resistance, PEI (Ultem) for flame-resistant cabin and electrical parts, PC and PC/ABS for covers, nylon for clips and LSR for seals. The right grade depends on temperature, fluid exposure and flammability requirements.

Do your parts meet FAR 25.853 flammability rules?

Flammability depends on the resin grade and part thickness, not on the molding process alone. We mold FAR 25.853-rated grades when your specification calls for them and supply the resin certificate. Final compliance testing is usually done by your program or an approved lab.

How much does an aerospace injection mold cost?

Mold cost depends on part size, complexity, number of cavities and tool material. Aluminum molds cost less and suit thousands of parts, while hardened steel molds cost more but run hundreds of thousands of shots. We quote each tool from your 3D model after DFM review.

What tolerances can your molding hold?

Our standard molded tolerance is ±0.1 mm, with tighter tolerances possible on critical features depending on resin and geometry. Shrinkage varies by material, so we confirm achievable tolerances after mold flow analysis and before tooling starts.