首页 » 博客 » 博客 » Zinc Die Casting: Alloys, Process & Part Design Guide

Zinc Die Casting: Alloys, Process & Part Design Guide

目录

拓维精密

需要专业的机械加工解决方案吗?拓维模型的团队随时准备为您提供全方位的制造支持。立即联系我们,获取您正在进行或即将开展的项目的报价!

Chrome plated zinc die cast door handle next to raw Zamak 3 casting with runner

Zinc die casting forces molten zinc alloy into a hardened steel die under high pressure to make precise, thin-walled metal parts at very high volume. Zinc melts at only about 385 °C, so it runs on fast hot chamber machines, gives long die life and produces parts with fine detail and smooth surfaces that plate well.

Die casting is ideal for small, detailed metal parts made by the thousands or millions: lock bodies, faucet handles, connector housings, zipper sliders and trim for the automotive industry, which is the largest user of zinc die cast components. Below we cover the alloys with real numbers, how the process works, the design rules that cut cost, and the limits most suppliers leave out.

Benefits of Zinc Die Casting

The advantages of zinc die casting come from the metal itself. Zinc’s superior casting fluidity and low melting temperature give it a casting capability that aluminum or magnesium cannot match, and zinc alloys offer a combination no other die casting metal matches:

  • Low melting point. Around 380 to 390 °C for Zamak alloys, far below aluminum at roughly 580 to 600 °C. Less heat means faster cycles and less thermal fatigue on the die.
  • Long tool life. Zinc dies routinely last well beyond a million shots, several times longer than typical aluminum dies. Lower tooling cost per part follows.
  • Thinner wall sections and fine detail. Zinc flows extremely well, so it fills a thinner wall than aluminum, plus small holes, sharp lettering and fine knurls. Few metal casting methods match this ability to cast detail.
  • Tight tolerances. Of the common die casting metals, zinc holds the tightest as-cast tolerances, which often removes secondary machining.
  • Excellent finishing. Zinc castings take chrome, nickel and other platings very well, which is why most decorative hardware is plated zinc.
  • High strength and impact resistance. The strength of zinc alloys is higher, and ductility much higher, than most common aluminum alloys used in die casting.
  • Bearing properties. ZA alloys have excellent bearing and wear properties, often replacing bronze bushings.
  • Thermal and electrical conductivity. Good electrical conductivity makes zinc useful for EMI shielding housings and connector bodies.

The trade-offs are weight (zinc is about 2.4 times denser compared to aluminum), creep under sustained load, and lower maximum service temperature. We cover those below. For most small parts, though, the use of zinc delivers reduced finishing and machining, and the advantages of zinc usually outweigh its weight.

Zinc Die Casting Alloys Compared

Zinc casting alloys fall into two groups. Zamak alloys contain about 4% aluminum, while ZA alloys contain higher amounts of aluminum (8 to 27%). Each alloy in die casting is chosen for its mechanical and physical properties and castability, so the properties of zinc alloys below should drive your material choice. Typical die cast values are shown; alloy specs are defined in ASTM B86 and B240.

合金 抗拉强度 伸长率 Brinell hardness 密度 机器类型 最适合
Zamak 3 about 283 MPa about 10% about 82 6.6 g/cm³ Hot chamber General purpose, best dimensional stability and plating
Zamak 5 about 331 MPa about 7% about 91 6.7 g/cm³ Hot chamber Higher strength and hardness, some loss of ductility
Zamak 2 about 359 MPa about 7% about 100 6.8 g/cm³ Hot chamber Highest Zamak strength, better creep and wear
Zamak 7 about 283 MPa about 13% about 80 6.6 g/cm³ Hot chamber High purity, best fluidity and ductility, thin walls
ZA-8 about 374 MPa about 8% about 103 6.3 g/cm³ Hot chamber Strength and creep resistance with hot chamber speed
ZA-12 about 404 MPa about 5% about 100 6.0 g/cm³ Cold chamber Bearings and higher-load parts
ZA-27 about 426 MPa about 2.5% about 119 5.0 g/cm³ Cold chamber Highest strength, wear and bearing applications

For comparison, aluminum alloy A380 has a tensile strength around 324 MPa, elongation near 3.5% and density of about 2.7 g/cm³. The International Zinc Association die casting site publishes full alloy data sheets.

These physical and mechanical properties are for die cast test bars; real die cast parts vary with wall thickness and porosity, so ask your die casting supplier for material properties measured on parts like yours.

Our recommendation: start with Zamak 3, the most widely used zinc casting alloy. It covers most parts, is easiest to cast and plate, and holds dimensions best over time. Move to Zamak 5 or Zamak 2 only when you need better mechanical properties such as strength or hardness, and to ZA-8 or EZAC when creep under load is the concern.

How the Zinc Die Casting Process Works

Die casting is a process in which molten metal is forced into a steel die under high pressure. Zinc can be cast with the hot chamber process, the fastest form of chamber die casting. The name describes the machine layout: the injection cylinder (the gooseneck) sits submerged in the bath of molten metal. Aluminum die casting cannot work this way because molten aluminum attacks iron or steel components, so it uses the slower cold chamber process.

A typical cycle looks like this:

  1. 模具制备。 The two die halves are heated to working temperature and sprayed with release agent.
  2. 注射。 A plunger pushes molten zinc from the gooseneck through the nozzle and into the die cavity in a fraction of a second.
  3. Solidification. The metal cools under pressure, which reduces porosity and captures fine detail.
  4. 驱逐。 The die opens and ejector pins push the casting out.
  5. Trimming. Runners, overflows and flash are removed, usually in a trim press.
  6. Secondary operations. Machining, tapping, deburring, tumbling, plating or painting as required.

Small parts may run several cycles per minute, and multi-cavity dies multiply output. High-strength ZA-12 and ZA-27 need cold chamber machines because of their higher aluminum content and melting range.

Historically, the most commonly used zinc grades were developed for this hot chamber route, and nearly every die cast zinc part today follows it. Our 压铸服务 page lists our machine sizes and capabilities, and the general guide 什么是压铸 explains how zinc compares with aluminum and magnesium.

Diagram of a hot chamber die casting machine with gooseneck submerged in molten zinc

Design Guidelines for Zinc Die Cast Parts

Good design cuts tooling cost and scrap more than any other factor. These are typical starting points; final values depend on part size and the caster’s process.

Design feature Typical guideline for zinc
壁厚 As thin as about 0.5 mm on small parts; 1 to 2.5 mm is common
Wall uniformity Keep walls as even as possible; core out thick sections
Draft angle Often under 1° on outside walls, slightly more on inside walls and deep cores
Fillets and radii Add radii at all internal corners, about 0.4 mm minimum
孔 Small cored holes are possible; deep, small holes are better drilled
主题 External threads can be cast; internal threads are usually tapped
Ribs Thinner than the adjoining wall, with draft and root radii

Design tips we give clients most often:

  • Core out heavy sections. Thick bosses cause shrink porosity, which shows up as blisters after plating.
  • Place the parting line deliberately. It leaves a witness line and decides where flash appears.
  • Plan for trimming. Gates and overflows need space and access.
  • Machine only what matters. Hold tight tolerances on the few faces that need them and let the casting do the rest.

"(《世界人权宣言》) North American Die Casting Association publishes design standards and tolerance tables that most casters work to.

表面处理选项

Zinc castings accept almost every common finish:

  • Electroplating: chrome, nickel, brass, copper and satin finishes for hardware and fixtures
  • Powder coating and wet paint: durable color for consumer and industrial parts
  • E-coating: thin, even corrosion protection, often under paint
  • Chromate and trivalent conversion coatings: light protection and a paint base
  • Tumbling and vibratory finishing: smooths edges and prepares for plating

One finish that does not work: anodizing. Anodizing is for aluminum and titanium, and people often ask for it on zinc parts by mistake. For a hard, colored metal look on zinc, use plating or powder coat instead.

Plating quality depends heavily on casting quality. Surface porosity traps plating chemicals, which later bubble as blisters. Ask your caster about porosity control on cosmetic faces. See our 表面处理服务 for available options.

Limitations to Plan For

Zinc is excellent for many parts, but not all. Be aware of these limits before committing to tooling:

Weight. At about 6.6 g/cm³, a cast zinc part weighs roughly 2.4 times as much as the same die cast part in aluminum. That is a plus for premium-feel hardware and a minus for anything carried or flown.

Creep. Zinc alloys slowly deform under sustained load, and the effect grows quickly with temperature. Bolted joints can lose clamp force over time. Use ZA-8, Zamak 2 or EZAC for parts under constant stress, and keep bolt loads moderate.

温度。 Continuous service above roughly 95 to 120 °C, depending on alloy, is not recommended. Engine-bay or hot-appliance parts often need aluminum instead.

Dimensional aging. Zamak castings shrink very slightly over the first weeks after casting. For precision parts, a low-temperature stabilizing heat treatment, done before final machining, reduces this.

腐蚀。. Zinc does not rust, but in wet, salty or acidic conditions it forms white corrosion products. Parts for outdoor or marine use need plating, paint or conversion coating. Any claim that zinc castings “never corrode” is not accurate.

Tooling cost. Steel dies are a significant upfront investment, so zinc casting pays off at volume. For a few dozen parts, CNC machining or other low-volume processes are usually cheaper.

Zinc vs Aluminum Die Casting

Choosing between aluminum and zinc is the most common decision buyers face, and any experienced die caster will ask about part size, weight and finish first. Here is how they compare in practice, alongside cast iron for context. Unlike iron casting in sand molds, both are high-volume die casting production processes:

系数 Zinc (Zamak 3) Aluminum (A380)
重量 Heavy, about 6.6 g/cm³ Light, about 2.7 g/cm³
Strength and ductility Higher ductility, good strength Good strength, low ductility
Thinnest practical walls Thinner Thicker
As-cast tolerances Tighter Wider
循环速度 Faster (hot chamber) Slower (cold chamber)
Die life Much longer Shorter
High-temperature service 有限公司 更好
Plating 优秀 More difficult
Material cost per part Higher for large parts (more mass) Lower for large parts

Rule of thumb: for small, detailed or plated parts, zinc usually wins on total cost even though the metal is heavier. For larger structural parts, lightweight parts and anything running hot, aluminum usually wins.

Common Defects and Their Causes

The usual defects are porosity (gas and shrinkage), cold shuts, flash, soldering of metal to the die and blisters after plating. Most trace back to part design, gate placement, die temperature or metal temperature. Our guide to casting defects, causes and fixes covers how to diagnose each one.

常见问题

What is zinc die casting used for?

It is used for small, precise metal parts made in high volumes. Common examples include locks and keys, door and cabinet hardware, faucet and shower parts, electrical connectors, EMI shielding housings, automotive interior trim, seat belt components, gears and zipper sliders. Plated decorative hardware is one of the largest markets.

Is zinc die casting stronger than aluminum?

Zamak alloys have similar or higher tensile strength than common aluminum die casting alloys such as A380, and much better ductility and impact resistance. Aluminum has the better strength-to-weight ratio and handles high temperatures better. For small, compact parts zinc is often the stronger practical choice.

Which zinc alloy is best for die casting?

Zamak 3 is the best starting point for most parts because it offers good strength, excellent castability, dimensional stability and plating quality. Zamak 5 adds strength and hardness. Zamak 2, ZA-8 and EZAC suit parts needing better creep or wear resistance. ZA-27 gives the highest strength but needs cold chamber casting.

Do zinc parts rust?

Zinc does not rust like steel, because rust is iron oxide. In moist, salty or acidic environments, though, zinc forms white corrosion products that can damage appearance and function. Outdoor and marine zinc parts should be plated, powder coated, painted or conversion coated for long-term protection.

How thin can the walls be on a zinc part?

Small zinc parts can be cast with walls of about 0.5 mm, and some miniature casting processes go thinner. Most production parts use 1 to 2.5 mm walls for reliable filling and strength. Thinner walls than aluminum are possible because molten zinc is very fluid.

Getting Your Zinc Die Cast Part Right

Die casting is highly efficient once the steel die is built, and die casting can produce millions of identical cast parts, so the material choice and design decisions you make early matter most. Zinc die casting is the best route when you need small, detailed metal parts with tight tolerances, a quality plated finish and very high volumes. Choose Zamak 3 unless you have a reason not to, design walls thin and uniform, and plan for creep, weight and temperature limits from the start.

Tuowei Precision supports zinc parts from design review and tooling through casting, 数控加工 and finishing. Send your drawing for an 即时报价,或访问 拓维模型主页 to see all our services.

Global service pages: 🇪🇸 Fundición de aluminio · 🇯🇵 ダイカスト
图为拓维模型的一名员工身穿蓝色Polo衫,站在工厂内背景模糊的数控机床前
关于作者
安迪

tuoweiprecision 制造工程师

作者:安迪,拓维模型制造工程师。. 安迪专攻数控加工、精密制造和生产工程领域,在从快速原型制作到大规模量产的整个项目过程中拥有丰富的实践经验。他与工程和制造团队紧密合作,共同评估材料、公差、加工工艺以及设计可制造性。 他的文章提供了实用且具有技术深度的见解,旨在帮助工程师和采购人员做出更明智的制造决策、优化生产效率,并确保零件质量的一致性。欢迎了解拓维模型的数控加工和定制制造解决方案,为您的下一个项目提供支持。.

让我们携手共创未来

与拓维模型携手,共同实现您的愿景

从快速原型制作到可扩展的生产,Tuowei Precision 提供可靠的数控加工服务,在每个环节都确保精度与一致性。立即启动您的项目。.

与我们联系!
保证在24小时内及时回复
🔐 所有上传内容均安全保密

探索洞察与创新

阅读我们关于数控加工、材料、表面处理及行业趋势的最新指南,以做出更明智的生产决策。

与我们联系!
保证在24小时内及时回复
🔐 所有上传内容均安全保密