¿Necesitas soluciones de mecanizado especializadas? El equipo de Tuowei Precision está a tu disposición para ayudarte con todas tus necesidades de fabricación. ¡Ponte en contacto con nosotros hoy mismo para solicitar un presupuesto para tus proyectos actuales o futuros!
Ask three shops to quote the same part and the prices can differ by 3×. CNC machining cost is not mysterious, though — it is machine time multiplied by an hourly rate, plus setup amortized over quantity, plus material and finishing. This guide gives you the actual formula, real 2026 hourly-rate ranges by machine type, a worked example, and the design decisions that move the number — the specifics most “cost factor” articles never commit to.
Part price = (Setup time × rate) ÷ Quantity + Cycle time × rate + Material + Tooling share + Finishing + Margin
| Máquina | Typical shop rate (US/EU) | Typical rate (China) |
|---|---|---|
| Fresado de 3 ejes | $40–75/hr | $12–25/hr |
| 4-axis milling | $55–90/hr | $18–30/hr |
| 5-axis milling | $75–150/hr | $30–50/hr |
| CNC lathe (2-axis) | $35–60/hr | $10–20/hr |
| Swiss-type lathe | $60–100/hr | $20–35/hr |
| Electroerosión por hilo | $60–120/hr | $25–45/hr |
Rates bundle the machine’s amortization, the operator, software, consumable tooling, utilities and overhead — which is why a $500k 5-axis bills at twice the rate of a $80k 3-axis.
A 100×60×25 mm 6061 bracket: 8 pockets, 12 holes, 4 tapped, ±0.05 mm generals, anodized. At quantity 10 from a China-based shop like ours:
| Elemento de coste | Cálculo | Per part |
|---|---|---|
| Setup (program + fixture + FAI) | 2 h × $25 ÷ 10 pcs | $5.00 |
| Mecanizado | 22 min × $20/hr | $7.30 |
| Material | 6061 blank 0.45 kg | $2.20 |
| Anodizing (lot fee ÷ 10) | $40 ÷ 10 | $4.00 |
| Inspection + packing + margin | ~20% | $3.70 |
| Precio por pieza | ≈ $22 |
The same part at quantity 1 costs ≈ $75 (setup and lot fees undiluted); at 500 it drops to ≈ $9–11. Quantity is the strongest lever there is.
| Driver | Typical price impact |
|---|---|
| Tolerance ±0.01 mm instead of ±0.1 mm | +30–100% on affected features (slower cuts, more inspection) |
| Internal sharp corners (EDM needed) | +$50–300 per feature set |
| Deep pockets (>4× tool Ø) | +20–60% cycle time (long tools cut slow) |
| Thin walls <1 mm | +30–80% (light cuts, scrap risk) |
| Titanium instead of aluminum | 3–8× machining time + 5–10× material |
| Stainless 316 instead of aluminum | ~2–3× machining time |
| 5-axis-only geometry | Higher rate but often cheaper overall than multiple 3-axis setups |
| Mirror finish Ra 0.2 µm | +15–40% finishing passes or manual polishing |
Our detailed teardown of aluminum pricing — what actually drives your price per part — goes deeper on the aluminum-specific levers.
US and European shops typically bill $35–150 per machine-hour depending on machine type (3-axis milling low end, 5-axis and Swiss high end). Chinese shops run $10–50 for the same spread. The quoted part price folds setup, material and finishing on top of that rate.
Estimate cycle time (roughly: material volume removed ÷ removal rate, plus 15–30 s per tool change and hole group), multiply by the machine rate, add setup divided by quantity, material, and finishing lot fees. Or skip the arithmetic and use our presupuesto al instante — upload a STEP file and get numbers back within 24 hours.
Because programming, fixturing and first-article inspection cost the same whether you buy 1 part or 1,000. At quantity one, those hours are the price. The spindle time itself is often the smallest line item.
Per hour, yes — roughly double a 3-axis rate. Per part, often no: one 5-axis setup can replace three or four 3-axis setups, cutting handling, fixtures and tolerance stack-ups. Complex parts frequently quote cheaper on 5-axis.
The fastest way to know your part’s cost is to quote it: upload your files to our quote page and our engineers return pricing with DFM feedback within 24 hours — including the design tweaks that would lower it. Explore our Servicios de mecanizado CNC y contract machining programs for volume pricing.
Escrito por Andy, ingeniero de fabricación en TUOWEI Precision. Andy está especializado en mecanizado CNC, fabricación de precisión e ingeniería de producción, y cuenta con experiencia práctica en el apoyo a proyectos que abarcan desde la creación rápida de prototipos hasta la producción a gran escala. Trabaja en estrecha colaboración con los equipos de ingeniería y fabricación para evaluar materiales, tolerancias, procesos de mecanizado y la facilidad de fabricación de los diseños. Sus artículos ofrecen información práctica y con base técnica para ayudar a ingenieros y compradores a tomar mejores decisiones de fabricación, optimizar la eficiencia de la producción y lograr una calidad constante de las piezas. Descubre las soluciones de mecanizado CNC y fabricación a medida de TUOWEI Precision para tu próximo proyecto.
Desde prototipos rápidos hasta la producción a gran escala, Tuowei Precision ofrece un mecanizado CNC fiable, con precisión y uniformidad en cada paso. Empieza tu proyecto hoy mismo.
Lee nuestras últimas guías sobre mecanizado CNC, materiales, acabados y tendencias del sector para tomar mejores decisiones de producción.