هل تحتاج إلى حلول متخصصة في مجال التصنيع الآلي؟ فريقنا في Tuowei Precision جاهز لمساعدتك في تلبية جميع احتياجاتك التصنيعية. تواصل معنا اليوم للحصول على عرض أسعار لمشاريعك الجارية أو المرتقبة!
Ask three shops to quote the same part and the prices can differ by 3×. CNC machining cost is not mysterious, though — it is machine time multiplied by an hourly rate, plus setup amortized over quantity, plus material and finishing. This guide gives you the actual formula, real 2026 hourly-rate ranges by machine type, a worked example, and the design decisions that move the number — the specifics most “cost factor” articles never commit to.
Part price = (Setup time × rate) ÷ Quantity + Cycle time × rate + Material + Tooling share + Finishing + Margin
| آلة | Typical shop rate (US/EU) | Typical rate (China) |
|---|---|---|
| الطحن ثلاثي المحاور | $40–75/hr | $12–25/hr |
| 4-axis milling | $55–90/hr | $18–30/hr |
| 5-axis milling | $75–150/hr | $30–50/hr |
| CNC lathe (2-axis) | $35–60/hr | $10–20/hr |
| Swiss-type lathe | $60–100/hr | $20–35/hr |
| التقطيع الإلكتروني السلكي | $60–120/hr | $25–45/hr |
Rates bundle the machine’s amortization, the operator, software, consumable tooling, utilities and overhead — which is why a $500k 5-axis bills at twice the rate of a $80k 3-axis.
A 100×60×25 mm 6061 bracket: 8 pockets, 12 holes, 4 tapped, ±0.05 mm generals, anodized. At quantity 10 from a China-based shop like ours:
| عنصر التكلفة | الحساب | Per part |
|---|---|---|
| Setup (program + fixture + FAI) | 2 h × $25 ÷ 10 pcs | $5.00 |
| التصنيع الآلي | 22 min × $20/hr | $7.30 |
| المواد | 6061 blank 0.45 kg | $2.20 |
| Anodizing (lot fee ÷ 10) | $40 ÷ 10 | $4.00 |
| Inspection + packing + margin | ~20% | $3.70 |
| سعر القطعة الواحدة | ≈ $22 |
The same part at quantity 1 costs ≈ $75 (setup and lot fees undiluted); at 500 it drops to ≈ $9–11. Quantity is the strongest lever there is.
| Driver | Typical price impact |
|---|---|
| Tolerance ±0.01 mm instead of ±0.1 mm | +30–100% on affected features (slower cuts, more inspection) |
| Internal sharp corners (EDM needed) | +$50–300 per feature set |
| Deep pockets (>4× tool Ø) | +20–60% cycle time (long tools cut slow) |
| Thin walls <1 mm | +30–80% (light cuts, scrap risk) |
| Titanium instead of aluminum | 3–8× machining time + 5–10× material |
| Stainless 316 instead of aluminum | ~2–3× machining time |
| 5-axis-only geometry | Higher rate but often cheaper overall than multiple 3-axis setups |
| Mirror finish Ra 0.2 µm | +15–40% finishing passes or manual polishing |
Our detailed teardown of aluminum pricing — what actually drives your price per part — goes deeper on the aluminum-specific levers.
US and European shops typically bill $35–150 per machine-hour depending on machine type (3-axis milling low end, 5-axis and Swiss high end). Chinese shops run $10–50 for the same spread. The quoted part price folds setup, material and finishing on top of that rate.
Estimate cycle time (roughly: material volume removed ÷ removal rate, plus 15–30 s per tool change and hole group), multiply by the machine rate, add setup divided by quantity, material, and finishing lot fees. Or skip the arithmetic and use our عرض أسعار فوري — upload a STEP file and get numbers back within 24 hours.
Because programming, fixturing and first-article inspection cost the same whether you buy 1 part or 1,000. At quantity one, those hours are the price. The spindle time itself is often the smallest line item.
Per hour, yes — roughly double a 3-axis rate. Per part, often no: one 5-axis setup can replace three or four 3-axis setups, cutting handling, fixtures and tolerance stack-ups. Complex parts frequently quote cheaper on 5-axis.
The fastest way to know your part’s cost is to quote it: upload your files to our quote page and our engineers return pricing with DFM feedback within 24 hours — including the design tweaks that would lower it. Explore our خدمات التصنيع الآلي باستخدام الحاسب الآلي الرقمي و contract machining programs for volume pricing.
بقلم آندي، مهندس تصنيع في شركة TUOWEI Precision. يتخصص آندي في التصنيع باستخدام الحاسب الآلي (CNC) والتصنيع الدقيق وهندسة الإنتاج، ويتمتع بخبرة عملية في دعم المشاريع بدءًا من النماذج الأولية السريعة وصولًا إلى الإنتاج على نطاق واسع. وهو يعمل عن كثب مع فرق الهندسة والتصنيع لتقييم المواد والتفاوتات المسموح بها وعمليات التصنيع وقابلية التصميم للتصنيع. تقدم مقالاته رؤى عملية ومستندة إلى المعرفة التقنية لمساعدة المهندسين والمشترين على اتخاذ قرارات تصنيع أفضل، وتحسين كفاءة الإنتاج، وتحقيق جودة متسقة للأجزاء. اكتشف حلول التصنيع باستخدام الحاسب الآلي (CNC) والتصنيع المخصص التي تقدمها TUOWEI Precision لمشروعك القادم.
بدءًا من النماذج الأولية السريعة وصولاً إلى الإنتاج القابل للتوسع، تقدم شركة Tuowei Precision خدمات تصنيع موثوقة باستخدام الحاسب الآلي (CNC) تتسم بالدقة والاتساق في كل خطوة. ابدأ مشروعك اليوم.
اقرأ أحدث أدلةنا حول التصنيع باستخدام الحاسب الآلي (CNC) والمواد والتشطيب واتجاهات الصناعة لاتخاذ قرارات إنتاجية أفضل.