目次

卓偉精密

専門的な機械加工ソリューションをお探しですか?Tuowei Precisionのチームが、お客様のあらゆる製造ニーズにお応えします。現在進行中または今後予定されているプロジェクトのお見積もりについては、ぜひ今すぐお問い合わせください!

CNC machining cost calculation - engineer estimating part price with drawing and machined parts

Ask three shops to quote the same part and the prices can differ by 3×. CNC machining cost is not mysterious, though — it is machine time multiplied by an hourly rate, plus setup amortized over quantity, plus material and finishing. This guide gives you the actual formula, real 2026 hourly-rate ranges by machine type, a worked example, and the design decisions that move the number — the specifics most “cost factor” articles never commit to.

The CNC Machining Cost Formula

Part price = (Setup time × rate) ÷ Quantity + Cycle time × rate + Material + Tooling share + Finishing + Margin

  • Setup: programming, fixturing, first-article inspection — 0.5–4 hours for typical parts, charged once per batch
  • サイクルタイム: minutes on the spindle per part — the heart of the quote
  • 素材: blank cost, including the 30–70% that becomes chips
  • 金型: special cutters, thread mills or form tools dedicated to your part
  • 仕上げ: anodizing, plating, heat treatment — often flat lot fees that hurt at low quantity

Real Hourly Rates by Machine Type (2026)

機械 Typical shop rate (US/EU) Typical rate (China)
3軸フライス加工 $40–75/hr $12–25/hr
4-axis milling $55–90/hr $18–30/hr
5-axis milling $75–150/hr $30–50/hr
CNC lathe (2-axis) $35–60/hr $10–20/hr
Swiss-type lathe $60–100/hr $20–35/hr
ワイヤー放電加工機 $60–120/hr $25–45/hr

Rates bundle the machine’s amortization, the operator, software, consumable tooling, utilities and overhead — which is why a $500k 5-axis bills at twice the rate of a $80k 3-axis.

Worked Example: Aluminum Bracket

A 100×60×25 mm 6061 bracket: 8 pockets, 12 holes, 4 tapped, ±0.05 mm generals, anodized. At quantity 10 from a China-based shop like ours:

原価要素 計算 Per part
Setup (program + fixture + FAI) 2 h × $25 ÷ 10 pcs $5.00
機械加工 22 min × $20/hr $7.30
素材 6061 blank 0.45 kg $2.20
Anodizing (lot fee ÷ 10) $40 ÷ 10 $4.00
Inspection + packing + margin ~20% $3.70
1個あたりの価格 ≈ $22

The same part at quantity 1 costs ≈ $75 (setup and lot fees undiluted); at 500 it drops to ≈ $9–11. Quantity is the strongest lever there is.

What Drives Your Quote Up

Driver Typical price impact
Tolerance ±0.01 mm instead of ±0.1 mm +30–100% on affected features (slower cuts, more inspection)
Internal sharp corners (EDM needed) +$50–300 per feature set
Deep pockets (>4× tool Ø) +20–60% cycle time (long tools cut slow)
Thin walls <1 mm +30–80% (light cuts, scrap risk)
Titanium instead of aluminum 3–8× machining time + 5–10× material
Stainless 316 instead of aluminum ~2–3× machining time
5-axis-only geometry Higher rate but often cheaper overall than multiple 3-axis setups
Mirror finish Ra 0.2 µm +15–40% finishing passes or manual polishing

10 Ways to Cut CNC Machining Cost

  • Loosen tolerances to ISO 2768-m wherever function allows — tolerance only what matters
  • Order more per batch: quantity 10 vs 1 typically halves unit price or better
  • Add corner radii ≥ 3 mm in pockets (standard tools, faster feeds)
  • Keep pockets shallower than 4× tool diameter
  • Choose 6061 over 7075 where strength allows; aluminum over steel; avoid exotic alloys
  • Use standard thread sizes and drilled-hole diameters
  • Design one-setup parts: features reachable from one or two faces
  • Avoid engraved text (or accept laser marking instead)
  • Batch finishing: one anodize color per order shares the lot fee
  • Send a STEP file plus a drawing that only calls out critical dims — over-dimensioned drawings get defensive quotes

Our detailed teardown of aluminum pricing — what actually drives your price per part — goes deeper on the aluminum-specific levers.

よくある質問

How much does CNC machining cost per hour?

US and European shops typically bill $35–150 per machine-hour depending on machine type (3-axis milling low end, 5-axis and Swiss high end). Chinese shops run $10–50 for the same spread. The quoted part price folds setup, material and finishing on top of that rate.

How do I estimate machining cost from a drawing?

Estimate cycle time (roughly: material volume removed ÷ removal rate, plus 15–30 s per tool change and hole group), multiply by the machine rate, add setup divided by quantity, material, and finishing lot fees. Or skip the arithmetic and use our 即時見積もり — upload a STEP file and get numbers back within 24 hours.

Why is CNC machining so expensive at quantity one?

Because programming, fixturing and first-article inspection cost the same whether you buy 1 part or 1,000. At quantity one, those hours are the price. The spindle time itself is often the smallest line item.

Is 5-axis machining more expensive?

Per hour, yes — roughly double a 3-axis rate. Per part, often no: one 5-axis setup can replace three or four 3-axis setups, cutting handling, fixtures and tolerance stack-ups. Complex parts frequently quote cheaper on 5-axis.

Get a Real Number, Not an Estimate

The fastest way to know your part’s cost is to quote it: upload your files to our quote page and our engineers return pricing with DFM feedback within 24 hours — including the design tweaks that would lower it. Explore our CNC加工サービス そして contract machining programs for volume pricing.

工場内のぼやけたCNC工作機械を背景に、青いポロシャツを着たトゥオウェイ・プレシジョン社のチームメンバーの肖像
著者について
アンディ

tuoweiprecision社の製造エンジニア

執筆:TUOWEI Precisionの製造エンジニア、アンディ。. アンディは、CNC加工、精密製造、生産工学を専門としており、ラピッドプロトタイピングから本格生産に至るまでのプロジェクト支援において、実務経験を有しています。彼は、エンジニアリングチームや製造チームと緊密に連携し、材料、公差、加工プロセス、および設計の製造適性を評価しています。 彼の記事は、実用的かつ技術的な知見に裏打ちされた洞察を提供し、エンジニアや購買担当者がより適切な製造上の意思決定を行い、生産効率を最適化し、一貫した部品品質を実現できるよう支援しています。次回のプロジェクトには、TUOWEI PrecisionのCNC加工およびカスタム製造ソリューションをご検討ください。.

さあ、次の時代を共に築きましょう

Tuowei Precisionと提携し、お客様のビジョンを形にしましょう

ラピッドプロトタイピングから量産に至るまで、Tuowei Precisionは、あらゆる工程において精度と一貫性を兼ね備えた信頼性の高いCNC加工を提供します。今すぐプロジェクトを始めましょう。.

お問い合わせ
24時間以内の迅速な対応をお約束します
🔐 すべてのアップロードは安全かつ機密です。

インサイト&イノベーション

CNC加工、材料、仕上げ、業界の動向に関する最新のガイドをご覧いただき、より適切な生産判断を行ってください。

お問い合わせ
24時間以内の迅速な対応をお約束します
🔐 すべてのアップロードは安全かつ機密です。