首页 » 博客 » Technical Guides » What Is Knurling? Types, Tools, Drawing Callouts and Design Guide

What Is Knurling? Types, Tools, Drawing Callouts and Design Guide

目录

拓维精密

需要专业的机械加工解决方案吗?拓维模型的团队随时准备为您提供全方位的制造支持。立即联系我们,获取您正在进行或即将开展的项目的报价!

Knurling is the process of forming a textured pattern — diamond, straight or helical ridges — onto a cylindrical surface, almost always on a lathe. It turns a slippery machined surface into a grip: thumb screws, tool handles, electrical connector shells and press-fit inserts all rely on it. This guide covers the two fundamentally different knurling tools, pattern and pitch selection, exactly how much the outside diameter grows, and how to call knurls out on a drawing so your machine shop produces what you expect.

Knurling Patterns: Diamond, Straight and Helical

Pattern 几何学 Primary use
Diamond (criss-cross) Two opposed helical ridge sets forming raised diamonds Hand grip in any direction — knobs, handles, fasteners
Straight Ridges parallel to the axis Rotational grip and press-fit retention in plastic/light alloys
Helical (single direction) One helix direction (LH or RH) Decorative, special assembly functions

Two Ways to Make a Knurl: Form Rolling vs Cut Knurling

系数 Form (roll) knurling Cut knurling
Principle Hardened wheels press and displace material Angled cutting wheels shave the pattern
Chips 无 是
OD change Grows above blank diameter Stays at or below blank diameter
Radial force on part High — can bend slender work Low — suits thin/long parts
Best materials Ductile: steel, brass, aluminum Stainless, hard alloys, thin walls
速度 Very fast — production standard Slower, cleaner pattern

How Much Does Knurling Increase Diameter?

Form knurling displaces metal outward: the finished OD is larger than the turned blank. The practical rule:

OD growth ≈ 0.5 × pitch (e.g., 0.8 mm pitch → ~0.4 mm growth)

Knurl pitch Typical blank undercut below finished OD
0.5 mm (fine) 0.2–0.3 mm
0.8 mm (medium) 0.3–0.45 mm
1.0 mm (coarse) 0.4–0.55 mm

Two drawing consequences: specify the finished OD over knurl (with a workable tolerance like ±0.1 mm), and keep the knurl clear of any bearing or sealing diameters.

Pitch Selection by Part Diameter

Pitch class Approx. pitch Suits diameters 感受
Fine 0.5 mm / 33 TPI Ø3–12 mm Smooth, precise adjustment knobs
中型 0.8 mm / 21 TPI Ø8–30 mm General-purpose grip
Coarse 1.0–1.6 mm Ø20 mm+ Aggressive grip, gloved hands

A coarse pitch on a small diameter gives too few diamonds — the pattern tears and looks ragged. When in doubt, medium.

Drawing Callouts That Shops Can Actually Follow

  • Pattern + pitch + standard: “DIAMOND KNURL, 0.8 mm PITCH, RAISED, PER ISO 13444” (ANSI/ASME B94.6 in inch practice: “96 DP DIAMOND KNURL”)
  • Finished diameter: “Ø12.4 ±0.1 OVER KNURL” — and the blank is the shop’s problem
  • Zone: dimension the knurl length and locate it from a datum face
  • Function note when critical: “KNURL FOR PRESS-FIT RETENTION IN PA66” tells the shop which quality matters (sharp full diamonds vs cosmetic uniformity)

Knurling for Press-Fit Inserts

Straight or diamond knurls are the standard anti-rotation feature on metal inserts molded or pressed into plastic. Design notes: knurl OD typically 0.2–0.4 mm over the hole, length ≥1× diameter for torque, and a plain pilot diameter to start alignment. Brass C360 is the classic insert material — see our brass CNC machining service.

Troubleshooting Knurls

问题 原因 修复
Double-tracked / ghost pattern Wheel circumference not dividing evenly into part OD Adjust blank OD slightly; use self-centering head
Flattened diamond tops Over-penetration Reduce infeed; check growth formula
Bent part Form-knurling force on slender work Support with tailstock, or switch to cut knurling
Ragged pattern in stainless Work hardening under rolling Cut knurling, sharp wheels, positive feed

常见问题

What is knurling used for?

Mainly grip: hand-operated knobs, screws and handles. Second, retention: knurled surfaces anchor press-fits and molded-in inserts against rotation and pull-out. Third, appearance on consumer hardware.

What tool is used for knurling?

A knurling tool held in the lathe turret — either forming wheels that press the pattern (form knurling) or angled cutting wheels that machine it (cut knurling). Scissor-type holders clamp the part between two wheels to cancel radial force.

Does knurling increase diameter?

Form knurling does — by roughly half the pitch. Cut knurling does not; it machines the pattern into the existing diameter.

What is a diamond knurl?

The most common pattern: two crossed helical ridge sets creating raised diamond points, giving grip in both rotation and axial pull directions.

Knurled Parts From Tuowei Precision

We produce knurled knobs, shafts and inserts on CNC lathes and Swiss machines — pattern, pitch and finished OD held to your callout. See our CNC turned parts capabilities and Swiss screw machining services, or send your drawing for a 24-hour quote.

图为拓维模型的一名员工身穿蓝色Polo衫,站在工厂内背景模糊的数控机床前
关于作者
安迪

tuoweiprecision 制造工程师

作者:安迪,拓维模型制造工程师。. 安迪专攻数控加工、精密制造和生产工程领域,在从快速原型制作到大规模量产的整个项目过程中拥有丰富的实践经验。他与工程和制造团队紧密合作,共同评估材料、公差、加工工艺以及设计可制造性。 他的文章提供了实用且具有技术深度的见解,旨在帮助工程师和采购人员做出更明智的制造决策、优化生产效率,并确保零件质量的一致性。欢迎了解拓维模型的数控加工和定制制造解决方案,为您的下一个项目提供支持。.

让我们携手共创未来

与拓维模型携手,共同实现您的愿景

从快速原型制作到可扩展的生产,Tuowei Precision 提供可靠的数控加工服务,在每个环节都确保精度与一致性。立即启动您的项目。.

与我们联系!
保证在24小时内及时回复
🔐 所有上传内容均安全保密

探索洞察与创新

阅读我们关于数控加工、材料、表面处理及行业趋势的最新指南,以做出更明智的生产决策。

与我们联系!
保证在24小时内及时回复
🔐 所有上传内容均安全保密