Aerospace · 3D Printing

3D Printing Aerospace Parts from Prototype to Flight Hardware

图威精密提供 三维打印 for engineers who need light brackets, ducts, housings and tooling fast, without paying for a mold. We print in engineering plastics, resins and metals, then machine critical faces when a drawing calls for tighter tolerances than printing alone can hold.

所有上传内容均安全保密
AS9100D
ISO 9001:2015
内部 CNC精加工
每份报价单均进行DFM审查
Powder-bed 3D printer build chamber with printed aerospace ducts and brackets
优势

Benefits of 3D Printing, Also Known as Additive Manufacturing

3D printing builds a part layer by layer from a CAD file. For flight hardware, the biggest advantage is weight reduction: material goes only where the load path needs it, which improves fuel efficiency and the performance of aircraft over their service life. A printed bracket can carry an internal lattice, a duct can follow a curved path in one piece, and an assembly of five machined parts can become one. These gains apply whether you build airliners, business jets or drones.

Speed matters just as much. With no tooling to build, engineers can quickly print, test and revise a design, which helps accelerate development timelines from months to weeks. For many teams, that alone can transform how they source low-volume parts, and it is why most programs start with 3D printing. The trade-off is that printed material does not behave exactly like wrought or cast metal, so safety-critical parts must pass stringent qualification before they replace a proven design, and that step can reshape a program schedule.

  • Lightweight components with lattices and topology-optimized shapes
  • Part consolidation that cuts assembly time and failure points
  • Internal channels for cooling, air flow or fluid routing
  • Low-volume production and customization with no mold cost
  • On-demand spare parts instead of a large inventory of parts
技术

3D Printing Technology Options for Flight Parts

Each printing technology suits different work, and five 3D printing technologies can produce various aircraft components. The right 3D printer depends on whether the part must look right, fit precisely or carry load.

技术最佳用途常见材料典型精度
FDMInterior prototypes, jigs and fixturesABS, PC, nylon, PEI±0.5%(最小值 ±0.5 毫米)
SLAWind tunnel models, fit checks, patternsStandard, tough and high-temp resins±0.1 毫米
SLSFunctional ducts, brackets and clips尼龙 PA12、PA11、TPU±0.3 毫米
MJFShort runs of housings and brackets尼龙 PA12±0.2 毫米
DMLS / SLM金属支架、歧管、热交换器Stainless steel, aluminum, Ti-6Al-4V±0.1 毫米

典型值。最终公差以您的报价为准。

For a deeper look at each process, see our 3D打印服务 页面。.

材料

Lightweight Materials Used in 3D Printing for Flight Parts

In practice, material decides whether a printed part is a model, a tool or a working component. These are the materials engineers most often ask us about; we confirm the exact grade in your quote.

High-Performance Plastics

PEI (Ultem 9085, a grade widely printed on Stratasys FDM systems) is chosen for cabin parts because of its resistance to extreme temperatures and its low smoke and toxicity behavior. Nylon PA12 from SLS or MJF gives tough, light ducts, clips and brackets for non-structural use. PC and ABS cover jigs, fixtures and early prototypes.

树脂

SLA, the process 3D Systems commercialized in the 1980s, uses 树脂 that give the smooth surfaces and fine detail needed for wind tunnel models, display parts and casting patterns. Standard resins are brittle, so we recommend tough or high-temperature grades for any part that will be handled or loaded.

金属

Metal printing builds parts in 17-4PH and 316L stainless steel, aluminum and Ti-6Al-4V. Ti-6Al-4V suits weight-critical fittings, aluminum suits heat exchangers and light housings, and stainless steel suits corrosion-resistant fittings and tooling. Printed metal needs stress relief, support removal and usually machining on mating faces.

应用

Applications of 3D Printing in the Aerospace Industry

3D printing applications in aerospace have moved well past concept models. Companies such as Boeing and Airbus already fly printed components, and GE prints fuel nozzles for its jet engines. Typical aircraft parts we see include:

  • 环境控制系统风管和通风口
  • 支架、卡扣和线缆固定件
  • 内饰件、饰板和座椅部件
  • 无人机(UAV)机身、有效载荷支架和防护罩
  • 航空电子设备外壳和连接器支架
  • 卫星支架、天线支架和小机箱
  • 带内部通道的发动机部件和燃油系统原型
  • 用于快速原型制作的风洞和贴合模型
  • 钻孔导向装置、装配夹具和检测夹具
  • Replacement parts for out-of-production airframes, an approach the US Air Force uses to keep older fleets flying

Engine makers built their printed parts on years of material and process qualification. For most buyers, the fastest return comes from prototypes, tooling, interior parts and UAV hardware, where qualification demands are lighter and the ability to produce custom parts in days pays off quickly. These uses also facilitate faster maintenance, because a part can be printed from a stored file instead of waiting for new tooling.

3D Printing vs CNC Machining

Advantages of 3D Printing vs Traditional Manufacturing Methods

Many flight parts can be made by printing or by traditional methods such as CNC machining. The better choice depends on shape, quantity and tolerance.

系数三维打印数控加工
最佳数量1 到几百1 到 几千
几何学Parts with complex geometries, lattices, internal channels棱柱形和车削件
典型公差±0.1 至 ±0.3 毫米精度可达±0.005毫米
材料性能Close to, not identical to, wrought stockFull wrought or forged properties
表面处理Rougher as printed; needs post-processingSmooth as machined
可扩展性Cost per part stays flat with volumeCost per part drops with volume
Setup costNo toolingFixtures and programming

Our rule of thumb: print when you need to produce complex shapes or low quantities, machine when the part carries high load or needs 严格的公差, and integrate both when a printed part has a few critical features.

3D printed titanium part having its bore and mating face CNC machined
Hybrid Print + Machine

增材制造与机械加工:关键部位的公差控制

A common mistake is expecting a metal print to hold a bearing bore or sealing face straight off the build plate. Printed surfaces are rough and can distort as residual stress releases, even though printing can enable the production of internal features that no cutter can reach. We plan hybrid parts from the start: leave machining stock on critical features, print, stress relieve, remove supports, then finish bores, threads and mating faces on our CNC machines. Printing allows the freedom of the shape, and machining protects the functionality of every interface. Hybrid parts are often the most innovative solutions here, because they make it practical to produce components that neither process could manufacture well alone.

Quality and Certification

Quality Control and Regulatory Standards for the Aviation Industry

Our AS9100D and ISO 9001:2015 quality system covers 3D printed parts the same way it covers machined ones. Depending on your requirements, we provide:

  • File review that flags thin walls, trapped powder and unsupported overhangs
  • Material certificates for powders and filaments
  • Dimensional inspection reports on critical features
  • First article inspection on request
  • Build and lot traceability

Certifying printed parts for safety-critical flight use is still time-consuming, and aviation authorities continue to develop guidance for it in 2026. If your part is flight-critical, plan qualification testing with your quality team before switching from a machined or cast design. See our 质量保证 查看检查详情请访问该页面。

过程

How Our 3D Printing Service Works for Flight Programs

Upload your fileSend a STEP or STL file with material, quantity and any critical features marked.
Engineering reviewAn engineer checks printability in our build software, picks the best process and flags features that need machining.
Print and post-processParts are printed, cleaned, stress relieved where needed and finished to your spec.
Inspect and shipCritical dimensions are measured, documents are packed with the order, and parts ship on the quoted timeline.
相关服务

Other Ways We Manufacture Flight Hardware

Printing is often the first step in the development of new hardware. When a design is proven, we can tailor the next process to volume and cost, using manufacturing technologies that can manufacture it at scale:

获取报价

Start Your Next 3D Printing Project

Upload your CAD file and tell us the material, quantity and critical features. Our engineers will recommend a process, flag anything that needs machining and send a quote with a clear delivery date. Each advancement in printing still has limits, and unlike many 3D printing companies, we can finish the part in-house when printing alone is not enough.

获取即时报价
🔒 所有上传内容均安全且保密
与我们联系!
保证在24小时内及时回复
🔐 所有上传内容均安全保密
— 常见问题 —

常见问题

航空航天
How is 3D printing used for flight hardware?

3D printing in aerospace covers prototypes, wind tunnel models, tooling, cabin parts, ducts, brackets and UAV hardware. Engine makers also print fuel nozzles and other qualified metal parts. Most programs start with printed prototypes because there is no tooling cost and a design can change within days.

Can 3D-printed parts be used on aircraft?

Yes, but requirements depend on the part. Interior parts, ducts, tooling and UAV hardware are printed routinely. Flight-critical structural parts need material and process qualification, and certification can take a long time. Your quality team should confirm the approval path before a printed part replaces a proven design.

What materials are best for printed flight parts?

Common choices include PEI for cabin parts, nylon PA12 for ducts and brackets, tough resins for models, and titanium, aluminum or stainless steel for metal parts. The right material depends on load, temperature and flammability requirements. We confirm the exact grade in your quote.

Is printing cheaper than CNC machining?

For complex shapes and quantities under a few hundred, printing is often cheaper because there is no tooling or fixture cost. For simple shapes, high volumes or tight tolerances, CNC machining usually wins. Many parts end up hybrid: printed to shape, then machined on critical features.

3D打印件的精度如何?

Typical accuracy is about ±0.1 mm for SLA and metal printing, ±0.2 mm for MJF and ±0.3 mm for SLS. When a part needs tighter tolerances, such as a bearing bore or sealing face, we leave machining stock and finish that feature on a CNC machine.

How long does a printed part take?

Small plastic parts are often printed within a few business days. Nylon powder and metal parts take longer because of build time, stress relief and post-processing. Your quote states the lead time after our engineers review the file and finishing requirements.