Tuowei Precision provides medical precision machining for device makers who need narrow limits, clean surfaces and full traceability. We use advanced CNC machining centers, 5-axis milling and Swiss-type turning to make parts in titanium, stainless steel, PEEK and aluminum, with tolerances down to ±0.005 mm under an ISO 13485 certified quality system.

In most sectors a part that is slightly out of tolerance causes an assembly problem. In the medical industry it can cause a failed implant, a jammed surgical instrument or a leaking fluid connection, and patient safety is at stake. Medical machining is about more than accuracy on one part; it is about producing the same parts thousands of times, and proving it with records. That is how reliable medical devices are built in the medical sector.
Computer numerical control (CNC) gives that repeatability. A CNC machine follows the same programme for every workpiece, and with a stable fixture and a defined inspection plan, critical features stay inside tolerance from the first article to the last lot. Machining allows complex medical shapes without tooling.
Mecanizado CNC de 5 ejes reaches five sides of a part in one setup. That suits machining complex parts such as orthopedic implants, instrument jaws and housings, because fewer setups mean fewer chances for errors from repositioning. Part sizes range from 5 × 5 × 5 mm up to 4000 × 1500 × 600 mm.
Swiss-type CNC turning on a sliding-headstock metal lathe supports the bar close to the cutting tool, so long, slender parts stay straight. It is the right process for bone screws, pins, dental implant parts and catheter components. See our Torneado CNC servicios.
3- and 4-axis milling handles plates, brackets and housings; turning centers with live tooling add flats, slots and cross-holes to round parts in the same setup.
Burrs are not acceptable on any medical device part. Edges are deburred and inspected under magnification, then finished by passivation, electropolishing, anodizing or bead blasting.
These precision components for medical applications serve medical manufacturers, surgeons and patients across health care, which you can see on our fabricación de productos sanitarios página.
Biocompatibility, strength, weight and sterilization method decide the biomaterial. All metals come from approved suppliers with material certificates.
| Material | Uso médico habitual | Machining note |
|---|---|---|
| Titanio de grado 5 (Ti-6Al-4V) | Implants, instruments | Strong and light; needs sharp tools and controlled heat |
| Titanio Grado 2 | Dental and implant parts | Commercially pure, very corrosion resistant |
| Acero inoxidable 316L | Instruments, implants, fittings | Low carbon, good corrosion resistance after passivation |
| Acero inoxidable 17-4PH | Instruments needing hardness | Heat treatable for strength and wear |
| PEEK | Spinal implants, instrument parts | Radiolucent, so it does not block X-ray images |
| Aluminum 6061 / 7075 | Housings, equipment parts | Light, easy to machine and anodize |
Medical device components need exceptional precision, tight tolerances and reliable records. We hold tolerances down to ±0.005 mm on critical features of small machined parts. Standard work typically runs ±0.05 mm or better, depending on geometry and material. We recommend narrow limits only where the function needs them, because every extra decimal adds machining and inspection time.
Quality control is built into production: drawing review, first article inspection, in-process checks and final measurement with coordinate measuring machines (CMM). Medical orders include material certificates, CMM reports and dimensional records against the specification, and our quality system is certified to ISO 13485, which supports customers selling to Food and Drug Administration (FDA) regulated markets. Details are on our garantía de calidad página.
Technology alone does not make a good medical part. Our machinists prove out each programme on the first piece, check critical features before the batch runs, and record tool changes that could affect size or surface finish. That discipline gives both precision and accuracy: parts are close to nominal and close to each other. For customers in orthopedic surgery, dental and diagnostics, this reliability of medical components matters more than raw machine speed, because it drives better medical outcomes, and it is what turns advanced machining into dependable machining solutions for medical products.
The manufacturing process needs no tooling, so it is the fastest route from a CAD file to a functional medical prototype. Most CNC medical prototypes ship within 5–7 business days. Small batches of 101 to 10,000 pieces typically take 5–15 business days. Learn more on our creación de prototipos de dispositivos médicos page, or see how machining fits into our fabricación por encargo de productos sanitarios servicio.
Upload your 3D file and drawing with quantity, material, finish and critical tolerances. Our engineers will review manufacturability and return a quote with DFM suggestions.
Presupuesto inmediatoEl mecanizado CNC en el ámbito médico utiliza fresadoras y tornos controlados por ordenador para fabricar implantes, instrumentos quirúrgicos y componentes de dispositivos a partir de metal o plástico. Permite obtener tolerancias ajustadas, formas complejas y una calidad repetible sin necesidad de utillaje, lo que resulta adecuado tanto para la creación de prototipos como para la producción en el ámbito de las tecnologías médicas.
Mantenemos tolerancias de hasta ±0,005 mm en las características críticas de las piezas pequeñas, mientras que en el trabajo estándar la tolerancia suele ser de ±0,05 mm o mejor. La tolerancia que se puede alcanzar depende del material, el tamaño y la geometría, y recomendamos límites estrechos únicamente cuando la función lo requiera.
Mecanizamos titanio de grado 2 y grado 5 (Ti-6Al-4V), acero inoxidable 316L y 17-4PH, PEEK, aluminio 6061 y 7075, y plásticos como POM y PC. Los pedidos médicos se envían con certificados de materiales que permiten rastrear cada pieza hasta su lote de materia prima.
Yes. We machine bone screws, plates and other implant components in titanium and PEEK. Surface integrity and cleanliness are protected through deburring, magnified inspection and careful handling, and implantable-device orders ship with material certifications and inspection reports.
Price depends on material, part size, number of setups, tolerances, finish and inspection requirements. Titanium and narrow limits cost more to machine than aluminum with standard limits. Send your drawing and quantity for a quote with DFM suggestions that can lower cost.