Tuowei Precision provides medical precision machining for device makers who need narrow limits, clean surfaces and full traceability. We use advanced CNC machining centers, 5-axis milling and Swiss-type turning to make parts in titanium, stainless steel, PEEK and aluminum, with tolerances down to ±0.005 mm under an ISO 13485 certified quality system.

In most sectors a part that is slightly out of tolerance causes an assembly problem. In the medical industry it can cause a failed implant, a jammed surgical instrument or a leaking fluid connection, and patient safety is at stake. Medical machining is about more than accuracy on one part; it is about producing the same parts thousands of times, and proving it with records. That is how reliable medical devices are built in the medical sector.
Computer numerical control (CNC) gives that repeatability. A CNC machine follows the same programme for every workpiece, and with a stable fixture and a defined inspection plan, critical features stay inside tolerance from the first article to the last lot. Machining allows complex medical shapes without tooling.
5軸CNC加工 reaches five sides of a part in one setup. That suits machining complex parts such as orthopedic implants, instrument jaws and housings, because fewer setups mean fewer chances for errors from repositioning. Part sizes range from 5 × 5 × 5 mm up to 4000 × 1500 × 600 mm.
Swiss-type CNC turning on a sliding-headstock metal lathe supports the bar close to the cutting tool, so long, slender parts stay straight. It is the right process for bone screws, pins, dental implant parts and catheter components. See our CNC旋盤加工 サービス。
3- and 4-axis milling handles plates, brackets and housings; turning centers with live tooling add flats, slots and cross-holes to round parts in the same setup.
Burrs are not acceptable on any medical device part. Edges are deburred and inspected under magnification, then finished by passivation, electropolishing, anodizing or bead blasting.
These precision components for medical applications serve medical manufacturers, surgeons and patients across health care, which you can see on our 医療機器の製造 ページ。.
Biocompatibility, strength, weight and sterilization method decide the biomaterial. All metals come from approved suppliers with material certificates.
| 素材 | 一般的な医療用途 | Machining note |
|---|---|---|
| チタングレード5(Ti-6Al-4V) | Implants, instruments | Strong and light; needs sharp tools and controlled heat |
| チタン・グレード2 | Dental and implant parts | Commercially pure, very corrosion resistant |
| ステンレス鋼 316L | Instruments, implants, fittings | Low carbon, good corrosion resistance after passivation |
| ステンレス鋼 17-4PH | Instruments needing hardness | Heat treatable for strength and wear |
| PEEK | Spinal implants, instrument parts | Radiolucent, so it does not block X-ray images |
| Aluminum 6061 / 7075 | Housings, equipment parts | Light, easy to machine and anodize |
Medical device components need exceptional precision, tight tolerances and reliable records. We hold tolerances down to ±0.005 mm on critical features of small machined parts. Standard work typically runs ±0.05 mm or better, depending on geometry and material. We recommend narrow limits only where the function needs them, because every extra decimal adds machining and inspection time.
Quality control is built into production: drawing review, first article inspection, in-process checks and final measurement with coordinate measuring machines (CMM). Medical orders include material certificates, CMM reports and dimensional records against the specification, and our quality system is certified to ISO 13485, which supports customers selling to Food and Drug Administration (FDA) regulated markets. Details are on our 品質保証 ページ。.
Technology alone does not make a good medical part. Our machinists prove out each programme on the first piece, check critical features before the batch runs, and record tool changes that could affect size or surface finish. That discipline gives both precision and accuracy: parts are close to nominal and close to each other. For customers in orthopedic surgery, dental and diagnostics, this reliability of medical components matters more than raw machine speed, because it drives better medical outcomes, and it is what turns advanced machining into dependable machining solutions for medical products.
The manufacturing process needs no tooling, so it is the fastest route from a CAD file to a functional medical prototype. Most CNC medical prototypes ship within 5–7 business days. Small batches of 101 to 10,000 pieces typically take 5–15 business days. Learn more on our 医療機器のプロトタイプ製作 page, or see how machining fits into our 医療機器の受託製造 サービス。
Upload your 3D file and drawing with quantity, material, finish and critical tolerances. Our engineers will review manufacturability and return a quote with DFM suggestions.
お見積もり医療用 CNC加工では、コンピュータ制御のフライス盤や旋盤を用いて、金属やプラスチックからインプラント、手術器具、医療機器の部品を切削します。この加工法は、金型を必要とせずに、厳しい公差、複雑な形状、そして安定した品質を実現するため、医療技術分野における試作から量産まで幅広く適しています。
小型部品の重要寸法については、±0.005 mmまでの公差を実現しており、標準的な加工では通常±0.05 mm以上を確保しています。達成可能な公差は材質、サイズ、形状によって異なりますが、機能上必要な場合に限り、狭い公差範囲を設定することを推奨しています。
当社は、チタン2級および5級(Ti-6Al-4V)、ステンレス鋼316Lおよび17-4PH、PEEK、 アルミニウム 6061 および 7075、ならびに POM や PC などのプラスチックを機械加工しています。 医療用製品のご注文には、各部品をその原材料のロットまで遡及できる材料証明書が同梱されます。
Yes. We machine bone screws, plates and other implant components in titanium and PEEK. Surface integrity and cleanliness are protected through deburring, magnified inspection and careful handling, and implantable-device orders ship with material certifications and inspection reports.
Price depends on material, part size, number of setups, tolerances, finish and inspection requirements. Titanium and narrow limits cost more to machine than aluminum with standard limits. Send your drawing and quantity for a quote with DFM suggestions that can lower cost.