Tuowei Precision provides precision machining for defense programs: weapon system housings, optics mounts, radar parts, missile components and UAV structures milled and turned from aluminum, titanium and hardened steel. Critical features hold tolerances as tight as ±0.002 mm, and every part leaves our machine shop with inspection data linked to its material lot.

Mission-critical systems and military platforms work in extreme temperatures, vibration, shock, salt spray and dust. A mount that is 0.02 mm off can shift an optic's zero; a housing with a poor sealing face lets moisture reach electronics. In the defense industry, small errors become field failures, so parts with tight tolerances, stable materials and documented inspection matter as much as the machine itself. Reliability starts with the drawing review, not the final check, and it is what keeps defense systems ready.
Repeatability matters too. A defense project often runs for years, and the part made in the tenth batch must match the first one. Each CNC machine runs a saved program on fixed fixtures, so a qualified part stays the same from one order to the next, whatever machine it runs on.
Housings, brackets, mounts, manifolds and structural parts are milled on 3- and 4-axis machining centers (every mill is checked for positional accuracy), with part sizes up to 4000 × 1500 × 600 mm and down to 5 × 5 × 5 mm. For other CNC machining needs, read about our 数控加工服务.
Complex parts with angled features, undercuts and sculpted surfaces are cut in a single setup on a 5-axis machine, which keeps feature-to-feature accuracy high on optics mounts and airframe brackets. See 5 轴数控加工.
Shafts, pins, bushings, connectors and threaded fittings are turned on a CNC lathe with threads, grooves and bearing seats finished in the same setup where possible.
Sharp internal corners, narrow slots and profiles in hardened steel or titanium are cut on a wire EDM machine without cutting force, holding tolerances as tight as ±0.005 mm.
| Defense segment | 典型部件 |
|---|---|
| Weapons platforms | Weapon system housings, sight and optics mounts, armor-grade brackets |
| Radar and communication systems | Radar parts, waveguide brackets, communication device enclosures |
| Missile systems | Missile components, guidance housings, fins and fittings |
| Unmanned aerial vehicles | Airframe brackets, sensor mounts, motor housings |
| Ground vehicles | Vehicle structural parts, hydraulic fittings, shafts |
| Naval equipment | Corrosion-resistant 316/316L housings and fittings |
Thin-walled aluminum housings distort if they are clamped too hard, so we rough, release and finish them in stages. Titanium needs sharp tools, low cutting speeds and steady coolant. Deep pockets and long bores are split into several operations to protect accuracy. These machining techniques let us produce high-precision, high-performance custom components that withstand extreme conditions in the field, the same discipline that aerospace work demands.
The right alloy decides weight, strength and corrosion life. Our machine shop cuts a wide range of materials:
Hard materials such as titanium are slow to cut and wear tools fast, so we plan feeds, tool paths and fixturing before the first cut. That planning is where an experienced machinist saves the most time and scrap.
Our quality system is certified to ISO 9001:2015 and AS9100D. Each defense application gets an inspection plan built from the drawing's critical features and industry standards, so every component is checked against stringent defense requirements.
了解更多信息,请访问我们的 质量保证 页面。.
The machine is only part of the answer. When you compare suppliers, ask how they control drawings and revisions, which machining processes they run in-house, how material is traced, what inspection reports come with each order, and whether they can support both prototypes and long-term production. Also confirm the export-control status of your drawings first: ITAR-controlled technical data has strict rules on where it can be sent, so share the classification at the RFQ stage.
Tuowei combines machining with sheet metal, finishing and assembly, and our CNC machines, trusted by defense manufacturers, support defense organizations from first sample to repeat orders. Advanced manufacturing works best when components for defense are planned as a full package. For complete builds, see our defense contract manufacturing service, and for lightweight or low-volume parts, see additive manufacturing for defense. For the full range of defense work, visit our defense manufacturing 页面。.
Send your drawing package with quantities, materials and finish callouts. Our engineers will review tolerances and return a quote with DFM feedback.
获取即时报价It is CNC milling, turning and multi-axis machining of parts for military systems, such as weapon housings, optics mounts, radar parts and UAV brackets. The parts need tight tolerances, documented materials and inspection records so they perform reliably in the field.
Our general machining tolerance is ±0.005 mm, and critical features can be held as tight as ±0.002 mm depending on material, size and geometry. Every critical dimension is verified with CMM inspection.
We machine aluminum alloys such as 7075-T6 and 6061-T6, titanium Grade 2 and 6Al-4V, stainless steels including 15-5 and 316/316L, tool steels, 4140, brass, copper, PEEK and Ultem.
Yes. Prototypes usually ship in 1–5 business days, small batches in 5–15 business days and production in 2–4 weeks. The same program and inspection plan carry from prototype to production.
Yes. Every part can ship with material certificates, inspection reports and laser-marked serial numbers that link each component to its material lot and inspection data for defense audits.